Re: Injecting loopback

That's not really an issue right? As long as you have connectivity and the task doesn't ask you to have traffic take any specific or optimal path, you should do anything about it. Connectivity is the requirement and by doing other things, you might get yourself in trouble later on. So keep it simple :-)

-- 
Regards,
Rick Mur
CCIE2 #21946 (R&S / Service Provider)
Sr. Support Engineer  IPexpert, Inc.
URL: http://www.IPexpert.com
On 3 jan 2010, at 15:46, Nuno Reis wrote:
> Got it. It is not a task requirement, but I was getting sup-optimal paths when "tracing" loopback address.
> 
> Thanks Rick.
> 
> -----Original Message-----
> From: Rick Mur [mailto:rmur_at_ipexpert.com] 
> Sent: Sunday, January 03, 2010 2:39 PM
> To: Nuno Reis
> Cc: ccielab_at_groupstudy.com
> Subject: Re: Injecting loopback
> 
> Definitely not, it's the right approach. 
> It's the only way to get the loopback addresses to be an internal address, if that is a task requirement.
> 
> If it's not and it's not specifically asked in a question to inject the loopback, but you do have a full reach ability requirement, I would use redistribute connected with a route-map matching all interfaces that are not in a routing protocol yet.
> 
> 
> -- 
> Regards,
> 
> Rick Mur
> CCIE2 #21946 (R&S / Service Provider)
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com
> 
> On 3 jan 2010, at 15:26, Nuno Reis wrote:
> 
>> Hi,
>> 
>> To fix a routing issue on my lab, on one router, I injected the loopback
>> address on two routing protocols at the same time to be seen as internal on
>> two different routing domains. Is it a wrong approach?
>> 
>> Thanks,
>> NR
>> 
>> 
>> Blogs and organic groups at http://www.ccie.net
>> 
>> _______________________________________________________________________
>> Subscription information may be found at: 
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net