Re: building my own R&S lab

From: Nadeem Rafi <nrafia_at_gmail.com>
Date: Tue, 29 Dec 2009 06:50:27 +0300

no, code is at 124-15T11 :)

On Tue, Dec 29, 2009 at 6:21 AM, Joe Astorino <jastorino_at_ipexpert.com>wrote:

> They are nice units (the 3725). I have one myself at home (yes, a 3725 for
> my home router. Why? Because I can : ) ) Just don't use it for CME
> running a SIP trunk to a Asterisk server :P I've had some fairly
> irritating
> DTMF issues, and the 3725 code stops at like 12.4.15T10 I believe.
>
> On Mon, Dec 28, 2009 at 9:42 PM, Narbik Kocharians <narbikk_at_gmail.com
> >wrote:
>
> > Majonestx,
> >
> > I agree i just upgraded all my racks to 3725s. Their price is very
> > reasonable.
> >
> > On Mon, Dec 28, 2009 at 4:19 PM, Majonestx <majonestx_at_gmail.com> wrote:
> >
> > > Buy 3725 for mpls.
> > >
> > >
> > > Michael Jones
> > > Sr. Network Engineer
> > > Datran Media
> > > 512-672-9554
> > >
> > >
> > > Sent from my iPhone
> > >
> > > On Dec 28, 2009, at 3:31 PM, Christopher Copley <
> copley.chris_at_gmail.com
> > >
> > > wrote:
> > >
> > > Depends on your budget, and, study material, and time lines. It also
> can
> > >> depend on if you use a vendor work book or not. Each vendor has
> their
> > >> own
> > >> hardware specs, that meet their work books, and still conform with the
> > >> CCIE
> > >> Lab format. I would personally recommend that you look at the Lab
> > >> Hardware
> > >> blue print on Cisco's site.
> > >> If you want to use all ISR's then I would recommend the 1841's for the
> 6
> > >> primary routers, you can pick these up for around $600.00 USD each. As
> > for
> > >> your back bone routers any good 2501 that has maxed memory and flash
> > will
> > >> work fine, ( you can pick those up cheap from many places). For your
> > >> switches you can get a couple smaller 8 port 3560's or use the old
> 3550s
> > >> (to
> > >> save money). The 3550 will give you around ~75-80% of the features you
> > >> need
> > >> at a major savings, and rent rack time for the other features.
> > >> Like I said, there are many options, the biggest factor is $$$$.
> Also
> > >> consider the cost of building vs. renting rack time. Unless you just
> > >> have
> > >> money to burn, (or your really motivated like most of us are) it might
> > be
> > >> more cost effective to rent time.
> > >> I personally have built my own rack, as it has helped with my job as
> > well,
> > >> but it have been a MAJOR cost in time and money. But I have learned a
> > lot
> > >> about the hardware in building a lab on your own.
> > >>
> > >> But IMHO it all depends on what you want to put into it. If you want
> > >> specifics please feel free to unicast me.
> > >>
> > >> HTH
> > >> Chris
> > >>
> > >> On Mon, Dec 28, 2009 at 4:11 PM, scuba diver <scuba1934_at_gmail.com>
> > wrote:
> > >>
> > >> I want to build my own R&S lab. What equipment do I need ?
> > >>>
> > >>> Thanks
> > >>>
> > >>> Scuba
> > >>>
> > >>>
> > >>> Blogs and organic groups at http://www.ccie.net
> > >>>
> > >>>
> _______________________________________________________________________
> > >>>
> > >>
> > >
> > > Subscription information may be found at:
> > >>> http://www.groupstudy.com/list/CCIELab.html
> > >>>
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >>
> > >
> > >
> > > Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > --
> > Narbik Kocharians
> > CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> > www.MicronicsTraining.com
> > Sr. Technical Instructor
> > YES! We take Cisco Learning Credits!
> > Training And Remote Racks available
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Regards,
>
> Joe Astorino CCIE #24347 (R&S)
> Sr. Technical Instructor - IPexpert
> Mailto: jastorino_at_ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security &
> Service
> Provider) Certification Training with locations throughout the United
> States, Europe and Australia. Be sure to check out our online communities
> at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Dec 29 2009 - 06:50:27 ART

This archive was generated by hypermail 2.2.0 : Sat Jan 02 2010 - 11:11:08 ART