RE: ISDN PRI

For Data: use channel-group command.

> Date: Thu, 17 Dec 2009 09:38:24 +0000
> Subject: Re: ISDN PRI
> From: ndheeraj.ccie_at_googlemail.com
> To: subeh.sharma_at_gmail.com
> CC: ccielab_at_groupstudy.com
>
> Thanks, but we are not using this for Voice.
> It is used only for data (for remote sites to dial in when their primary
> link fails).
> So we don't have a PVDM module.
>
> Is there any command to configure router so that the VWIC doesn't ask for
> DSP and can be used for DATA only.
>
> Thanks,
> DN
>
> On Thu, Dec 17, 2009 at 6:56 AM, Subeh Sharma
<subeh.sharma_at_gmail.com>wrote:
>
> > Hello Dheeraj,
> >
> > Which router is it? Do you've a PVDM module inserted already? Generally,
> > for PRI calls, DSP resources are required which in turn are provided by
PVDM
> > modules and aren't inbuilt . Can you check in "show diag" if you've any
> > installed in the router? If not, then you need to purchase one in order
for
> > your setup to work.
> >
> > You can also use DSP calculator to check how many internal DSP resources
> > are available in your router:
> >
> > http://www.cisco.com/cgi-bin/Support/DSP/cisco_prodsel.pl
> >
> > HTH
> > Subeh.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
Received on Thu Dec 17 2009 - 14:57:29 ART