Re: ISDN PRI

You don't have enough DSP in your router.

try this:
pri-group timeslots 1-2,16

If that goes okay, paste your show dsp all output

-frog

On Thu, Dec 17, 2009 at 9:39 AM, Dheeraj Nambala <
ndheeraj.ccie_at_googlemail.com> wrote:

> Hi Experts,
>
> I am trying to configure a VWIC2-2MFT-G703 card for pure data PRI.
> I receive the following error message while trying to configure timeslots -
>
> Router(config)#controller E1 0/1/0
> Router(config-controller)#pri-group timeslots 1-10,16
> % Not enough DSP resources available to configure pri-group on controller
> E1
> 0/1/0
> % The remaining dsp resources are enough for 0 time slots.
> % For current codec complexity, 1 extra dsp(s) are required to create this
> voice port.
> Router(config-controller)#
>
>
> Can someone please guide me?
>
> Thanks,
> DN
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Dec 17 2009 - 10:04:32 ART