Re: Please confirm (conf#b211b1f92ef6b5a6d3ad11dce7150981)

2009/12/16 Cisco certification <ccielab_at_groupstudy.com>

> Hi,
>
> You have tried to post to a GroupStudy.com certification mailing list.
> Because
> the server does not recognize you as a confirmed poster, you will be
> required
> to authenticate that you are using a valid e-mail address and are not a
> spammer. By confirming this e-mail you certify that you are not sending
> Unsolicited Bulk Email (UBE).
>
> PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
> YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
>
>
> By confirming this e-mail you also certify the following:
>
> 1. The message does NOT break Cisco's Non-Disclosure requirements.
>
> 2. The message is NOT designed to advertise a commercial product.
>
> 3. You understand all postings become property of GroupStudy.com
>
> 4. You have searched the archives prior to posting.
>
> 5. The message is NOT inflammatory.
>
> 6. The message is NOT a test message.
>
> To confirm, simply reply to this message. No editing is necessary. Once
> confirmed, you will be able to post without additional confirmations.
>
>
> Welcome to GroupStudy.com!
>
>
> First time posters to GroupStudy.com are required to agree to the
> GroupStudy terms and conditions.
> Replying to this email, certifies you have read and agree to the GroupStudy
> posting guidelines and terms and conditions.
>
> --- Original Message Follows ---
>
> Date: Wed, 16 Dec 2009 18:09:47 +0100
> Subject: How to test snmp warmstart trap
> From: Juan <fferrer10_at_gmail.com>
> To: ccielab_at_groupstudy.com
>
> Hi Guys:
>
> I have a 1800 series router with a 12.4T ios release, but it seems this
> platform does not suppot the "test snmp trap snmp warmstart" command....
> anyone can tell me if i can test this type of trap using the "test crash"
> command, and forcing a software error by example?
>
> And by the way, if you execute a "reload" on the router console, this type
> of system reset must or must no generate a warmstart trap?
>
> Thanks in advance and best regards.
>
>
>
>
> --
> Juan
>
>
>
>

-- 
Juan Faure
Blogs and organic groups at http://www.ccie.net