Question with QoS in switch 2960G

Hello,

I know I can limit a traffic in a router but now my boss my job is to limit a
traffic from a customers which has a server in a Cisco2960G, I want to limit
to 30M.

I have tried 3 ways :

1.-
am-tv(config-if)#max-reserved-bandwidth ?
  <1-100> Max. reservable bandwidth as % of interface bandwidth
  <cr>
am-tv(config-if)#

2.-
am-tv(config-if)#storm-control unicast level ?
  <0.00 - 100.00> Enter rising threshold
  bps Enter suppression level in bits per second
  pps Enter suppression level in packets per second
am-tv(config-if)#

3.-
am-tv#sh policy-map
  Policy Map EZC
    Class class-default
      police 30000000 40000 exceed-action drop

am-tv(config)#int gi0/14
am-tv(config-if)#service-policy input EZC

My idea is to implement the 3th one since I gues this is the better way to
limit to 30Mbps. The issue is that when I send traffic thru the port, I do not
see traffic match when I display with : "am-tv#sh policy-map interface
gigabitEthernet 0/14" command.

Let me know if some of you were able to make this work, if you have a
configuration example for the 3rth case, please send a unicast mail .

My IOS :

am-tv#sh ver | in IOS
Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(44)SE2,
RELEASE SOFTWARE (fc2)
am-tv#

Thanks a lot,

Regards

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 02 2009 - 21:43:38 ART