RE: UniverCD Access for R&S Lab v4.0

Hi Everyone,

Here is a recommended two step method to determine what the current
technical documentation that is available from Cisco. This method is
particularly useful for those that are used to using UNIVERCD in the past.

Step 1). Enter in the old URL of www.cisco.com/univercd and you received
the following note from Cisco:

"Beginning May 14, 2007, Cisco will begin migrating product documentation
from the Cisco Connection Online (CCO) Documentation site to the "Cisco
Technical Support and Documentation" site on Cisco.com.
As documents are migrated, they are replaced with redirects to the new
locations. Please update your bookmarks to reflect new document URLs.
Additionally, new product documentation will begin to appear only on the
Technical Support and Documentation site."

Step 2). Click on the "Cisco Technical Support and Documentation" web-link
within this note and it will re-direct you to the following URL:

http://www.cisco.com/cisco/web/psa/default.html?mode=prod

This is the new technical reference substitute for the old UNIVERCD. While
it is generally the same as UNIVERCD, the new page has many differences that
distinguish it from UNIVERCD.

Therefore, this is the technical documentation you should expect to have
access to in the actual R&S CCIE Lab:

http://www.cisco.com/cisco/web/psa/default.html?mode=tech

I would bookmark this link and extensively review its content.

HTH,

-Bruce Caslow CCIE #3139
 Master Cisco 360 Instructor
 NetMasterClass, LLC

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Aminder Athwal
Sent: Tuesday, December 01, 2009 7:02 AM
To: nrafia_at_gmail.com
Cc: Andre Luis Gomes da Silva; Jorge Cortes; ccielab_at_groupstudy.com
Subject: Re: UniverCD Access for R&S Lab v4.0

Well it would be there as a just in case, if something comes up and you
need quick clarification. Would be good if you could easily navigate it
and double check config.

/Aminder

nrafia_at_gmail.com wrote:
> does it really have any value in lab? when there is no time to make a
visit
> to docd. Every one who went for lab is saying he was unable to finish the

> config and troubleshooting part in time. Rest you can figure out....
>
> HTH
>
> On Nov 30, 2009 10:04pm, Andre Luis Gomes da Silva
> <andre.l.gomes79_at_gmail.com> wrote:
>
>> Hi Jorge, I believe that it is still available to the lab test.
>>
>
>
>
>
>> Try the way, www.cisco.com, after that choose the "Support" and "Select a
>>
>
>
>> product".
>>
>
>
>> I believe that is it!
>>
>
>
>
>
>> Best regards.
>>
>
>
>
>
>> 2009/11/30 Jorge Cortes jorge.cortes.cano_at_gmail.com>
>>
>
>
>
>
>>> Hi there,
>>>
>
>
>
>
>>> Do you know if access to univercd is still allowed at the time of the
>>>
>> exam
>>
>
>
>>> for the new version of the lab? If so, do you know what changes has it
>>>
>
>
>>> undergone? I'm asking this because I've been browsing in Univercd and it
>>>
>
>
>>> has
>>>
>
>
>>> been brought to my attention that most of the information is being
>>>
>> moved to
>>
>
>
>>> CCO, and some documents have been completely removed.
>>>
>
>
>
>
>>> Thanks in advance,
>>>
>
>
>
>
>>> Jorge
>>>
>
>
>
>
>
>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>
>
>
>
>>> _______________________________________________________________________
>>>
>
>
>>> Subscription information may be found at:
>>>
>
>
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>
>
>
>
>
>
>> Blogs and organic groups at http://www.ccie.net
>>
>
>
>
>
>> _______________________________________________________________________
>>
>
>
>> Subscription information may be found at:
>>
>
>
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Dec 02 2009 - 12:58:46 ART