Re: FRTS MQC

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t13/feature/guide/frqosmqc.html

http://blog.internetworkexpert.com/2008/01/24/mqc-based-frame-relay-traffic-shaping/

On Tue, Nov 24, 2009 at 10:12 PM, S Malik <ccie.09_at_gmail.com> wrote:

> If I am trying to achive traffic shaping on a frame relay interface then is
> it an option?
>
> On Tue, Nov 24, 2009 at 1:03 PM, garry baker <baker.garry_at_gmail.com>wrote:
>
>> Can you, yes you can...
>>
>> Must you, I guess it depends on what you are trying to accomplish and what
>> the requirement is...
>>
>> policy-map FRTS
>> class class-default
>> shape average 8000
>>
>> interface Serial0/0
>> no ip address
>> encapsulation frame-relay
>> shutdown
>> clock rate 2000000
>> frame-relay class FRTS
>> frame-relay map ip 1.1.1.1 16
>> service-policy output FRTS
>> map-class frame-relay FRTS
>> frame-relay cir 1
>>
>>
>>
>>
>> On Tue, Nov 24, 2009 at 8:49 PM, S Malik <ccie.09_at_gmail.com> wrote:
>>
>>> Can I apply a policy-map (configured for shaping) directly under a
>>> Frame-Relay Main interface as "service-policy out" OR I must define
>>> "map-class fram-relay"?
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --
>> Garry L. Baker
>>
>> "There is no 'patch' for stupidity." - www.sqlsecurity.com
>>
>
>

-- 
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
Blogs and organic groups at http://www.ccie.net