thanks to all problem has been solved
> Date: Sat, 14 Nov 2009 13:35:11 +0500
> Subject: Re: VPN Redurect traffic
> From: taurusadnan19_at_gmail.com
> To: faizankhurshid921_at_hotmail.com
> CC: piotr_at_ccie1.com; ccielab_at_groupstudy.com
>
> Dear faizan:-
> According to my understanding regarding your
> topology try 1 thing i thing they wil solve your problem.
>
> i thing your primary Hub and Sec router back-to-back connected to each
> other and run any dynamic routing protocol b/w them.
>
> you configure Vpn at primary router then you want to access some
> branches terminated on your Sec router??
>
> you need to Redistribute Vpn Route called "Reverse Route" that is
> injected in the primary router routing table when vpn user connect
> Remotly.by using "Redistribute static" command on your primary router
> .or more spacifcally redistribution With route-map.route map must math
> your Vpn pool address.
>
> using Redistribution command your vpn pool addresses reachable any
> where in your Network
>
> Try, that may Solve your problem
>
> Thanks
> Muhammad ADNAN
> CCIE R&S
>
>
>
>
> On 11/14/09, faizan khurshid <faizankhurshid921_at_hotmail.com> wrote:
> > HUb spoke topoly using DMVPN infact im trying to say that major
branches
> > comes on HUB RTR Primary with (pimray ISP)
> > few branches comes on secondary RTR (with Secodary ISP) as i do Vpn
> > remotley
> > on HUB Primary RTR i can acces my braches which comes on Primary RTR
(with
> > Primary ISP) but not able to access those branhces which come on
Secodnary
> > Rtr(with Secodary ISP)
> >
> > Primray ISP link terminate on Primary RTR and Secondary ISP Link
terminata
> > on
> > Secodary RTR .Keep 1 think in mind
> > i configure Remote access Vpn on Primary RTR
> >
> > Hope you understand my point
> >
> >> Date: Sat, 14 Nov 2009 08:05:36 +0100
> >> Subject: Re: VPN Redurect traffic
> >> From: piotr_at_ccie1.com
> >> To: faizankhurshid921_at_hotmail.com
> >> CC: ccielab_at_groupstudy.com
> >>
> >> Hi,
> >> The question is do you need spoke-to-spoke connectivity via Hub router?
Do
> >> you have DMVPN configured or just simple IPSec tunnels from branches to
> >> the
> >> HQ?
> >>
> >> Despite of DMVPN, if you have redundant routers on the HQ and you want
> >> connect your branches via IPSec VPN the best option would be
> >> implementation
> >> of IPSec HSRP redundancy. Of course it works only when you have two
> > head-end
> >> routers in the same VLAN so that HSRP can be configured between them.
Then
> >> you configure your spokes to connect to the VIP address of HSRP group.
> >>
> >> If you want DMVPN with two hubs you should configure tunnel routing
> > properly
> >> to be able to share spokes between hubs. But from you description I
assume
> >> you want all your spokes to be connected to one hub only.
> >>
> >> HTH,
> >> --
> >> Piotr Matusiak
> >> CCIE #19860 (R&S, SEC)
> >> Technical Instructor
> >> MicronicsTraining.com
> >>
> >> If you can't explain it simply, you don't understand it well enough -
> >> Albert Einstein
> >>
> >>
> >> 2009/11/14 faizan khurshid <faizankhurshid921_at_hotmail.com>
> >>
> >> > Dear All
> >> >
> >> >
> >> > Issue regarding HUB and spoke topology .I have Two RTR Primary and
> > seconday
> >> > i
> >> > configured remote access VPN on Head office Permiter RTR to
remotely
> >> > acces
> >> > my head office and branches .Actually im facing Issue is that the few
> >> > branches terminate on Secondary RTR which i m not able to access them
> >> > remotely
> >> > coz i know the reson i configrued Remote access vpn on permiter RTR
> >> > .is ther any possbiility to redirect my traffic so im able to
remotely
> >> > access
> >> > my those branches which comes from secondary router
> >> >
> >> >
> >> >
> >> >
> >> > _________________________________________________________________
> >> > Windows Live: Keep your friends up to date with what you do online.
> >> >
> >> >
> >>
> >
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci
> >> >
> >>
> >
al-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010<ht
> >>
> >
tp://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci%0
> >>
> >
Aal-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010>
> >> >
> >> >
> >> > Blogs and organic groups at http://www.ccie.net
> >> >
> >> >
Received on Sat Nov 14 2009 - 14:04:43 ART
This archive was generated by hypermail 2.2.0 : Tue Dec 01 2009 - 06:36:29 ART