Re: EIGRP Stub with Leak Map

Besides the connected routes you will advertise everything BUT the
prefix identified in the prefix-list.

On Sat, Nov 7, 2009 at 8:03 AM, Sergei Udovenko <udovenko_at_gmail.com> wrote:
> Hello!
> Need some clarification on Leak-map with eigrp stub. When I use leak-map
> under eigrp stub, does leak-map map only "leaks" the routes that defined
> under eigrp stub [connected static summary redistributed] pool or it's
> doesn't matter.
> Here is example, where you define* eigrp stub connected with leak-map, so as
> I understand ONLY connected routes that matched under leak-map could be
> advertised?*
>
> Thanks!
>
>
> ip prefix-list SW2_LOOPBACK seq 5 permit 150.1.8.0/24
> !
> route-map STUB_LEAK_MAP deny 10
> match ip address prefix-list SW2_LOOPBACK
> !
> route-map STUB_LEAK_MAP permit 20
> !
> router eigrp 100
> *eigrp stub connected leak-map STUB_LEAK_MAP*
>
>
>
> --------------------
> Best regards,
> Sergei
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net