Re: Frame-relay pvc-status and usage

That was my thought. Thanks for the input.

Justin

On Fri, Oct 30, 2009 at 8:08 AM, Ryan West <rwest_at_zyedge.com> wrote:

> Justin,
>
> As long as FR does not have the option of adding those mappings later, i.e.
> you forgot to put no frame-relay inv on your interface, then you can safely
> ignore the other PVC status output. In the end, what shows up from 's fram
> map' is important.
>
> -ryan
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Justin Mitchell
> Sent: Friday, October 30, 2009 6:25 AM
> To: Cisco certification
> Subject: Q: Frame-relay pvc-status and usage
>
> It seems a common frame-relay requirement is that traffic only flow on the
> required PVCs and that there are no dynamic map entries. Does the following
> output meet those requirements? Mostly curious about the PVC STATUS =
> ACTIVE.
>
> I assume it says ACTIVE because both sides of the FRS are up and in theory
> that is a viable DLCI, but it is UNUSED.
>
> R2#sh fram map
> Serial0/0.124 (up): ip 172.16.124.4 dlci 201(0xC9,0x3090), static,
> CISCO, status defined, active
> Serial0/0.124 (up): ip 172.16.124.1 dlci 201(0xC9,0x3090), static,
> broadcast,
> CISCO, status defined, active
> Serial0/0.124 (up): ip 172.16.124.2 dlci 201(0xC9,0x3090), static,
> CISCO, status defined, active
> R2#sh fram pvc | i STAT
> DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
> Serial0/0.124
> DLCI = 203, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0
> DLCI = 204, DLCI USAGE = UNUSED, PVC STATUS = ACTIVE, INTERFACE = Serial0/0
> DLCI = 205, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0
> DLCI = 206, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
> Serial0/0
> R2#
>
>
> --
> Justin G. Mitchell
> http://www.google.com/profiles/jgmitchell
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Justin G. Mitchell
http://www.google.com/profiles/jgmitchell
Blogs and organic groups at http://www.ccie.net