Re: Packets dropping

I saw a car stopped on the street this morning. What was its problem? :-)

We need a little bit more context.

1. What platforms are you testing?
2. Are those devices "properly" configured, i.e. is there any QoS, ACL
or other features that may limit the traffic flow / modify latency
implemented?
3. What interface types are used?
4. Have you checked interface error counters?
5. If those are fiber-optics, what are optical measurements on the path (OTDR)?
6. Have you tried replacing patch cables and/or XFP/XENPAK/X2 modules?
7. etc.

--
Marko
CCIE #18427 (SP)
My network blog: http://cisco.markom.info/
On Wed, Oct 28, 2009 at 23:54, Jose Padilla <jpadilla141_at_gmail.com> wrote:
> I have a network with a 10gig fibre uplink from one site to another site. I
> run a packet blast/test through the 10gig network, and it's showing dropped
> packets at the other end of the test. The bandwidth is definitely not
> saturated. What could be causing this?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net