Re: VTP and Mgmt. traffic

Hello Hady,

Some thoughts / answers:

1) Not sure if there is a better way, but for me I remove the vtp configs,
delete vlan.dat file and reload.

2) A lot of discussions in the past over this one. See this link for more
info on VLAN 1 and when / why the switches uses this vlan. (watch the ugly
word wrap with this link)

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_35_se/configuration/guide/swvlan.html#wp1150302

After you go through the link some, please respond with some questions.
Many smart people on this list

3) This is a great test and one that I suggest you lab up. Watch the error
messages and remember these ... ;-)

HTH,

Andrew Lee Lissitz

On Thu, Oct 22, 2009 at 3:05 PM, hady tannous <hadytannous_at_hotmail.com>wrote:

> Hi,
>
>
>
> 1- How do i set the VTP settins back to their default. Including changing
> the
> domain name to it's default
>
>
>
> 2- Is the switche's management traffic sent on Vlan 1 or the Native
> Vlan i.e. if I change the Native Vlan from 1 to 10 for example which
> Vlan will the switch use for CDP, STp etc...
>
>
>
> 3- If i have different native Vlans on 2 switches connected together, what
> is
> the worste case scenario ?
>
>
>
>
>
> thx a lot
>
> Hadi
>
> _________________________________________________________________
> New Windows 7: Simplify what you do everyday. Find the right PC for you.
> http://www.microsoft.com/windows/buy/
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net