Re: Tough odr question ... ;-)

Hey guys, yall rock. Many thanks

Yep, I did speed up the timers. This helps (I think) ... but the default
route took forever in my re-created lab test.

Dale, at first I did the same thing and finally remembered to try this on
the virtual template as well.

Ryan, I did the debugs, but I did not see a way to see the particular routes
being advertised. Perhaps I did not do the right debugs ... I did see CDP
updates performing as expected.

I will try and again in just a few. Thanks guys,

Andrew

On Tue, Oct 20, 2009 at 8:34 PM, Scott Morris <smorris_at_ine.com> wrote:

> You can always reduce your CDP timers in order to speed things up. :)
> But it should be pretty quick unless you have other issues.
>
> "debug ip routing"?
>
> ALL From_NJ wrote:
> > Hey team,
> >
> > Every time I think of odr, I always think of the dog from Garfield; not
> sure
> > why. Any who ...
> >
> > I configured hub and spoke, no worries, all is good. Fairly quickly the
> > spokes send their routes to the Hub; cool. In my lab, it takes a long
> while
> > for the default route to get to the spokes from the hub.
> >
> > It takes well over 5 minutes or so ... I am doing ASET # 5. Two routers
> w/
> > ppp over FR. One side hub, the other is a spoke.
> >
> > Any thoughts?
> >
> > Many TIA team!
> >
> >
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net