Re: Tough odr question ... ;-)

My recollection of this lab was that it required a bunch of
ODR-related config that the DocCD didn't even acknowledge was
possible. Sure enough, though, it was.

I also had a brain explosion during this lab and had CDP enabled on
the wrong interface (Serial instead of Virtual-Template or something),
so I was really up the creek for a while :-)

cheers,
Dale

On Wed, Oct 21, 2009 at 9:22 AM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:
> There is always a good chance I did something wrong ;-)
>
> Thanks for the feedback, I will get some more time tomorrow with the labs
> and will look over everything.
>
> The doc cd mentioned simply enabling it on the Hub, and the solutions guide
> (auto verify) shows 'network 12.0.0.0" configured under router ODR.
>
> I followed the doc cd ... and auto verify script took points off.
>
> Any thoughts on putting the network in the configs?
>
> BTW - I am going to lab this up tonight in my home lab ... i appreciate
> you.
>
> Andrew
>
>
> On Tue, Oct 20, 2009 at 5:57 PM, Mohamed El Henawy <m.henawy_at_link.net>wrote:
>
>> did you make any changes...when I did that one it was normal.....
>>
>>
>> --------------------------------------------------
>> From: "ALL From_NJ" <all.from.nj_at_gmail.com>
>> Sent: Tuesday, October 20, 2009 10:18 PM
>> To: "Cisco certification" <ccielab_at_groupstudy.com>
>> Subject: Tough odr question ... ;-)
>>
>> Hey team,
>>>
>>> Every time I think of odr, I always think of the dog from Garfield; not
>>> sure
>>> why. Any who ...
>>>
>>> I configured hub and spoke, no worries, all is good. Fairly quickly the
>>> spokes send their routes to the Hub; cool. In my lab, it takes a long
>>> while
>>> for the default route to get to the spokes from the hub.
>>>
>>> It takes well over 5 minutes or so ... I am doing ASET # 5. Two routers
>>> w/
>>> ppp over FR. One side hub, the other is a spoke.
>>>
>>> Any thoughts?
>>>
>>> Many TIA team!

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 21 2009 - 09:37:48 ART