Re: difference b/w ospf command

I though he mentioned "IP OSPF database" command, i was wondering what
version of IOS he was using.

On Fri, Oct 16, 2009 at 1:21 PM, Donald Virgil <d.virgil88_at_gmail.com> wrote:

> Nadeem,
>
> sh ip ospf database summary self-originate displays only LSA's originated
> by
> the local router.
>
> sh ip ospf database summary 150.1.0.5 shows ALL the LSA from the router ID
> specified.
>
>
> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_osp3.html#wp1012173
>
> Don.
>
> On Fri, Oct 16, 2009 at 4:08 PM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
>
> > hi,whats difference of using command
> > ip ospf database summary self-originate and ip ospf database summary
> > 150.1.0.5 self-originate or ip ospf database summary 150.1.0.5, where
> > 150.1.0.5 is ip address from where these commands are being initiated.
> >
> > Any input will be appreciated..
> >
> > Best Regards,
> >
> > Nadeem Rafi
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
YES! We take Cisco Learning Credits!
Training And Remote Racks available
Blogs and organic groups at http://www.ccie.net