Re: FR Switch problem

No, the tunnel is not OK. FR is not IP. You have no FR connection
between two FR switches and it's perfectly normal FR DTEs on thow
switches can't communicate with each other.

You can play with FRoMPLS if you can't have switches connected using
FR (I see no reason not to, though).

On Fri, Oct 16, 2009 at 11:22, JAZ <azeemu_at_gmail.com> wrote:
> I think Tunnel is ok ., no need for NNI .. I am doing something wrong
> .. I dont know
>
> On Fri, Oct 16, 2009 at 12:43 AM, Nag <nagendra.cisco_at_gmail.com> wrote:
>> Jaz,
>>
>> Hav not tried this. But technically the interface between FRSW should be
>> NNI. Can you try that?.
>>
>> Regards,
>> Nagendra
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of JAZ
>> Sent: Thursday, October 15, 2009 9:05 PM
>> To: Cisco certification
>> Subject: FR Switch problem
>>
>> Guys ,
>> Need ur help ... I am trying to configure FR switch.
>> I am using IE methord
>> (http://www.internetworkexpert.com/resources/compound.frame-relay.htm)
>> to join 2 router to make 1 FR sw.
>>
>> But, always PVC STATUS = INACTIVE
>>
>> Here is the connectivity
>>
>> R1-----FRSW ---FRSW1 ----R7
>>
>> But, if tried to connect R1 to R2 (on single FR sw ... works fine)
>> ..... looks like soem tunnel issue ... but I am unable to find .....
>>
>> Can anyone help me please..................
>>
>> Thanks
>> Jaz
>>
>>
>>
>> FRSW:
>> ============================================================================
>> ===================
>> FRSW#sh ver
>> Cisco Internetwork Operating System Software
>> IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(10), RELEASE SOFTWARE
>> (fc3)
>> Copyright (c) 1986-2004 by cisco Systems, Inc.
>> Compiled Tue 17-Aug-04 03:58 by kellythw
>> Image text-base: 0x03094A1C, data-base: 0x00001000
>>
>> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>> BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
>> RELEASE SOFTWARE (fc1)
>>
>> FRSW uptime is 1 hour, 14 minutes
>> System returned to ROM by reload
>> System image file is "flash:/c2500-is-l.123-10.bin"
>>
>> cisco 2520 (68030) processor (revision M) with 14336K/2048K bytes of memory.
>> Processor board ID 10351051, with hardware revision 00000003
>> Bridging software.
>> X.25 software, Version 3.0.0.
>> Basic Rate ISDN software, Version 1.1.
>> 1 Ethernet/IEEE 802.3 interface(s)
>> 2 Serial network interface(s)
>> 2 Low-speed serial(sync/async) network interface(s)
>> 1 ISDN Basic Rate interface(s)
>> 32K bytes of non-volatile configuration memory.
>> 16384K bytes of processor board System flash (Read ONLY)
>>
>> Configuration register is 0x2102
>>
>>
>> FRSW#sh run
>> Building configuration...
>>
>> Current configuration : 2324 bytes
>> !
>> version 12.3
>> service timestamps debug datetime msec
>> service timestamps log datetime msec
>> no service password-encryption
>> !
>> hostname FRSW
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> no aaa new-model
>> ip subnet-zero
>> !
>> frame-relay switching
>> !
>> !
>> !
>> interface Tunnel0
>> B no ip address
>> B tunnel source Async4
>> B tunnel destination 12.0.0.2
>> !
>> interface Ethernet0
>> B no ip address
>> B shutdown
>> !
>> interface Serial0
>> B description To R1
>> B no ip address
>> B encapsulation frame-relay
>> B no ip route-cache
>> B clockrate 64000
>> B no fair-queue
>> B frame-relay intf-type dce
>> B frame-relay route 102 interface Serial1 201
>> B frame-relay route 106 interface Serial2 601
>> B frame-relay route 107 interface Tunnel0 701
>> B frame-relay route 108 interface Tunnel0 801
>> B frame-relay route 109 interface Tunnel0 901
>> B frame-relay route 116 interface Serial3 611
>> !
>> interface Serial1
>> B description To R2
>> B no ip address
>> B encapsulation frame-relay
>> B no ip route-cache
>> B shutdown
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 201 interface Serial0 102
>> B frame-relay route 206 interface Serial2 602
>> B frame-relay route 207 interface Tunnel0 702
>> B frame-relay route 208 interface Tunnel0 802
>> B frame-relay route 209 interface Tunnel0 902
>> B frame-relay route 226 interface Serial3 622
>> !
>> interface Serial2
>> B description Connected to R6-S0
>> B no ip address
>> B encapsulation frame-relay
>> B no ip route-cache
>> B shutdown
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 601 interface Serial0 106
>> B frame-relay route 602 interface Serial1 206
>> B frame-relay route 607 interface Tunnel0 706
>> B frame-relay route 608 interface Tunnel0 806
>> B frame-relay route 609 interface Tunnel0 906
>> !
>> interface Serial3
>> B description Connected to Rack1R6-s1
>> B no ip address
>> B encapsulation frame-relay
>> B no ip route-cache
>> B shutdown
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 611 interface Serial0 116
>> B frame-relay route 622 interface Serial1 226
>> B frame-relay route 667 interface Tunnel0 766
>> B frame-relay route 668 interface Tunnel0 866
>> B frame-relay route 669 interface Tunnel0 966
>> !
>> interface BRI0
>> B no ip address
>> B shutdown
>> !
>> interface Async4
>> B ip address 12.0.0.1 255.0.0.0
>> B async dynamic routing
>> B async mode dedicated
>> !
>> ip http server
>> ip classless
>> !
>> !
>> !
>> !
>> line con 0
>> B exec-timeout 0 0
>> line aux 0
>> B modem InOut
>> B transport input all
>> B speed 38400
>> B flowcontrol hardware
>> line vty 0 4
>> B login
>> !
>> end
>> FRSW#sh ip int brief
>> Interface B B B B B B B B B IP-Address B B B OK? Method Status
>> B B Protocol
>> Async4 B B B B B B B B B B 12.0.0.1 B B B B YES manual up
>> B B up
>> BRI0 B B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> BRI0:1 B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> BRI0:2 B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> Ethernet0 B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> Serial0 B B B B B B B B B B unassigned B B B YES manual up
>> B B up
>> Serial1 B B B B B B B B B B unassigned B B B YES manual administratively
>> down down
>> Serial2 B B B B B B B B B B unassigned B B B YES manual administratively
>> down down
>> Serial3 B B B B B B B B B B unassigned B B B YES manual administratively
>> down down
>> Tunnel0 B B B B B B B B B B unassigned B B B YES unset B up
>> up
>>
>> FRSW#ping 12.0.0.2
>>
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds:
>> !!!!!
>> Success rate is 100 percent (5/5), round-trip min/avg/max = 72/72/72 ms
>>
>> ============================================================================
>> ==========================
>>
>> FRSW1:
>>
>> ============================================================================
>> ==========================
>>
>> FRSW1'#sh ver
>> Cisco Internetwork Operating System Software
>> IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(26c), RELEASE SOFTWARE
>> (fc1)
>> Copyright (c) 1986-2007 by cisco Systems, Inc.
>> Compiled Mon 30-Jul-07 17:24 by ccai
>> Image text-base: 0x03065AE8, data-base: 0x00001000
>>
>> ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
>> BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
>> RELEASE SOFTWARE (fc1)
>>
>> FRSW1' uptime is 1 hour, 19 minutes
>> System returned to ROM by reload
>> System image file is "flash:/c2500-is-l.122-26c.bin"
>>
>> cisco 2520 (68030) processor (revision N) with 14336K/2048K bytes of memory.
>> Processor board ID 17194821, with hardware revision 00000003
>> Bridging software.
>> X.25 software, Version 3.0.0.
>> Basic Rate ISDN software, Version 1.1.
>> 1 Ethernet/IEEE 802.3 interface(s)
>> 2 Serial network interface(s)
>> 2 Low-speed serial(sync/async) network interface(s)
>> 1 ISDN Basic Rate interface(s)
>> 32K bytes of non-volatile configuration memory.
>> 16384K bytes of processor board System flash (Read ONLY)
>>
>> Configuration register is 0x2102
>>
>> FRSW1'#sh r
>> 01:18:24: %SYS-5-CONFIG_I: Configured from console by consoleun
>> Building configuration...
>>
>> Current configuration : 1900 bytes
>> !
>> version 12.2
>> service timestamps debug uptime
>> service timestamps log uptime
>> no service password-encryption
>> !
>> hostname FRSW1'
>> !
>> !
>> ip subnet-zero
>> !
>> frame-relay switching
>> !
>> !
>> !
>> interface Tunnel0
>> B no ip address
>> B tunnel source Async4
>> B tunnel destination 12.0.0.1
>> !
>> interface Ethernet0
>> B no ip address
>> B shutdown
>> !
>> interface Serial0
>> B description To R7
>> B no ip address
>> B encapsulation frame-relay
>> B no fair-queue
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 701 interface Tunnel0 107
>> B frame-relay route 702 interface Tunnel0 207
>> B frame-relay route 706 interface Tunnel0 607
>> B frame-relay route 708 interface Serial1 807
>> B frame-relay route 709 interface Serial2 907
>> B frame-relay route 766 interface Tunnel0 667
>> !
>> interface Serial1
>> B description To R8
>> B no ip address
>> B encapsulation frame-relay
>> B shutdown
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 801 interface Tunnel0 108
>> B frame-relay route 802 interface Tunnel0 208
>> B frame-relay route 806 interface Tunnel0 608
>> B frame-relay route 807 interface Serial0 708
>> B frame-relay route 809 interface Serial2 908
>> B frame-relay route 866 interface Tunnel0 668
>> !
>> interface Serial2
>> B description To R4
>> B no ip address
>> B encapsulation frame-relay
>> B shutdown
>> B clockrate 64000
>> B frame-relay intf-type dce
>> B frame-relay route 901 interface Tunnel0 109
>> B frame-relay route 902 interface Tunnel0 209
>> B frame-relay route 906 interface Tunnel0 609
>> B frame-relay route 907 interface Serial0 709
>> B frame-relay route 908 interface Serial1 809
>> B frame-relay route 966 interface Tunnel0 669
>> !
>> interface Serial3
>> B no ip address
>> B shutdown
>> !
>> interface BRI0
>> B no ip address
>> B encapsulation hdlc
>> B shutdown
>> !
>> interface Async4
>> B ip address 12.0.0.2 255.0.0.0
>> B encapsulation slip
>> B async dynamic routing
>> B async mode dedicated
>> !
>> ip classless
>> ip http server
>> !
>> !
>> line con 0
>> line aux 0
>> B modem InOut
>> B transport input all
>> B speed 38400
>> B flowcontrol hardware
>> line vty 0 4
>> B login
>> !
>> end
>>
>> FRSW1'#sh ip int brief
>> Interface B B B B B B B B B IP-Address B B B OK? Method Status
>> B B Protocol
>> Async4 B B B B B B B B B B 12.0.0.2 B B B B YES manual up
>> B B up
>> BRI0 B B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> BRI0:1 B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> BRI0:2 B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> Ethernet0 B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> Serial0 B B B B B B B B B B unassigned B B B YES manual up
>> B B up
>> Serial1 B B B B B B B B B B unassigned B B B YES manual administratively
>> down down
>> Serial2 B B B B B B B B B B unassigned B B B YES manual administratively
>> down down
>> Serial3 B B B B B B B B B B unassigned B B B YES unset B administratively
>> down down
>> Tunnel0 B B B B B B B B B B unassigned B B B YES unset B up
>> B B up
>> FRSW1'#ping 12.0.0.1
>>
>> Type escape sequence to abort.
>> Sending 5, 100-byte ICMP Echos to 12.0.0.1, timeout is 2 seconds:
>> !!!!!
>> Success rate is 100 percent (5/5), round-trip min/avg/max = 72/73/80 ms
>>
>> ============================================================================
>> =========================
>> R1:
>> R1#sh run
>> *Mar B 1 19:41:06.843: %SYS-5-CONFIG_I: Configured from console by console
>> Building configuration...
>>
>> Current configuration : 643 bytes
>> !
>> version 12.4
>> service timestamps debug datetime msec
>> service timestamps log datetime msec
>> no service password-encryption
>> !
>> hostname R1
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> no aaa new-model
>> !
>> !
>> ip cef
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> interface Ethernet0/0
>> B no ip address
>> B shutdown
>> B half-duplex
>> !
>> interface Serial0/0
>> B ip address 172.1.17.1 255.255.255.0
>> B encapsulation frame-relay
>> B frame-relay map ip 172.1.17.7 107 broadcast
>> !
>> interface Ethernet0/1
>> B no ip address
>> B shutdown
>> B half-duplex
>> !
>> ip http server
>> no ip http secure-server
>> !
>> !
>> !
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> line con 0
>> line aux 0
>> line vty 0 4
>> B login
>> !
>> !
>> end
>>
>> R1#sh fram map
>> Serial0/0 (up): ip 172.1.17.7 dlci 107(0x6B,0x18B0), static,
>> B B B B B B B broadcast,
>> B B B B B B B CISCO, status defined, inactive
>> R1#sh fram pvc
>>
>> PVC Statistics for interface Serial0/0 (Frame Relay DTE)
>>
>> B B B B B B B Active B B Inactive B B B Deleted B B B Static
>> B Local B B B B B 0 B B B B B B 1 B B B B B B 0 B B B B B B 0
>> B Switched B B B 0 B B B B B B 0 B B B B B B 0 B B B B B B 0
>> B Unused B B B B 0 B B B B B B 5 B B B B B B 0 B B B B B B 0
>>
>> DLCI = 102, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:13:54, last time pvc status changed 00:13:34
>>
>> DLCI = 106, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:13:56, last time pvc status changed 00:13:36
>>
>> DLCI = 107, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:47:44, last time pvc status changed 00:47:40
>>
>> DLCI = 108, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:14:02, last time pvc status changed 00:13:42
>>
>> DLCI = 109, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:14:03, last time pvc status changed 00:13:43
>>
>> DLCI = 116, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 00:14:07, last time pvc status changed 00:13:47
>> R1#sh fram lmi
>>
>> LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
>> B Invalid Unnumbered info 0 B B B B B B Invalid Prot Disc 0
>> B Invalid dummy Call Ref 0 B B B B B B B Invalid Msg Type 0
>> B Invalid Status Message 0 B B B B B B B Invalid Lock Shift 0
>> B Invalid Information ID 0 B B B B B B B Invalid Report IE Len 0
>> B Invalid Report Request 0 B B B B B B B Invalid Keep IE Len 0
>> B Num Status Enq. Sent 504 B B B B B B B Num Status msgs Rcvd 489
>> B Num Update Status Rcvd 0 B B B B B B B Num Status Timeouts 15
>> B Last Full Status Req 00:00:54 B B B B Last Full Status Rcvd 00:00:54
>> R1#sh ip int b
>> Interface B B B B B B B B B IP-Address B B B OK? Method Status
>> B B Protocol
>> Ethernet0/0 B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> Serial0/0 B B B B B B B B B 172.1.17.1 B B B YES NVRAM B up
>> B B up
>> Ethernet0/1 B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>>
>> ============================================================================
>> =======================
>> R7:
>> R7#sh run
>> Building configuration...
>>
>> Current configuration : 784 bytes
>> !
>> version 12.4
>> service timestamps debug datetime msec
>> service timestamps log datetime msec
>> no service password-encryption
>> !
>> hostname R7
>> !
>> boot-start-marker
>> boot-end-marker
>> !
>> !
>> no aaa new-model
>> !
>> !
>> ip cef
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> interface Serial0/0
>> B ip address 172.1.17.7 255.255.255.0
>> B encapsulation frame-relay
>> B frame-relay map ip 172.1.17.1 701 broadcast
>> !
>> interface Serial0/1
>> B no ip address
>> B shutdown
>> !
>> interface Serial0/2
>> B no ip address
>> B shutdown
>> !
>> interface Serial0/3
>> B no ip address
>> B shutdown
>> !
>> interface Ethernet1/0
>> B no ip address
>> B shutdown
>> B half-duplex
>> !
>> interface Ethernet1/1
>> B no ip address
>> B shutdown
>> B half-duplex
>> !
>> ip http server
>> no ip http secure-server
>> !
>> !
>> !
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> line con 0
>> line aux 0
>> line vty 0 4
>> B login
>> !
>> !
>> end
>>
>> R7#sh fram map
>> Serial0/0 (up): ip 172.1.17.1 dlci 701(0x2BD,0xACD0), static,
>> B B B B B B B broadcast,
>> B B B B B B B CISCO, status defined, inactive
>> R7#sh fram pvc
>>
>> PVC Statistics for interface Serial0/0 (Frame Relay DTE)
>>
>> B B B B B B B Active B B Inactive B B B Deleted B B B Static
>> B Local B B B B B 0 B B B B B B 2 B B B B B B 0 B B B B B B 0
>> B Switched B B B 0 B B B B B B 0 B B B B B B 0 B B B B B B 0
>> B Unused B B B B 0 B B B B B B 3 B B B B B B 0 B B B B B B 0
>>
>> DLCI = 701, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 01:36:36, last time pvc status changed 00:46:55
>>
>> DLCI = 706, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 01:36:33, last time pvc status changed 01:02:59
>>
>> DLCI = 708, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0
>>
>> B input pkts 1 B B B B B B output pkts 1 B B B B B B in bytes 34
>> B out bytes 34 B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 1 B B B B out bcast bytes 34
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 01:36:35, last time pvc status changed 01:03:01
>>
>> DLCI = 709, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 01:36:36, last time pvc status changed 01:03:02
>>
>> DLCI = 766, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
>> Serial0/0
>>
>> B input pkts 0 B B B B B B output pkts 0 B B B B B B in bytes 0
>> B out bytes 0 B B B B B B B dropped pkts 0 B B B B B in pkts dropped 0
>> B out pkts dropped 0 B B B B B B B B out bytes dropped 0
>> B in FECN pkts 0 B B B B B in BECN pkts 0 B B B B B out FECN pkts 0
>> B out BECN pkts 0 B B B B B in DE pkts 0 B B B B B B out DE pkts 0
>> B out bcast pkts 0 B B B B out bcast bytes 0
>> B 5 minute input rate 0 bits/sec, 0 packets/sec
>> B 5 minute output rate 0 bits/sec, 0 packets/sec
>> B pvc create time 01:01:56, last time pvc status changed 01:01:56
>> R7#sh fram lmi
>>
>> LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
>> B Invalid Unnumbered info 0 B B B B B B Invalid Prot Disc 0
>> B Invalid dummy Call Ref 0 B B B B B B B Invalid Msg Type 0
>> B Invalid Status Message 0 B B B B B B B Invalid Lock Shift 0
>> B Invalid Information ID 0 B B B B B B B Invalid Report IE Len 0
>> B Invalid Report Request 0 B B B B B B B Invalid Keep IE Len 0
>> B Num Status Enq. Sent 521 B B B B B B B Num Status msgs Rcvd 433
>> B Num Update Status Rcvd 0 B B B B B B B Num Status Timeouts 89
>> B Last Full Status Req 00:00:11 B B B B Last Full Status Rcvd 00:00:11
>> R7#sh ip int b
>> Interface B B B B B B B B B IP-Address B B B OK? Method Status
>> B B Protocol
>> Serial0/0 B B B B B B B B B 172.1.17.7 B B B YES NVRAM B up
>> B B up
>> Serial0/1 B B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> Serial0/2 B B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> Serial0/3 B B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> Ethernet1/0 B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> Ethernet1/1 B B B B B B B B unassigned B B B YES NVRAM B administratively
>> down down
>> R7#
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.421 / Virus Database: 270.14.17/2436 - Release Date: 10/14/09
>> 18:32:00
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Oct 16 2009 - 12:27:04 ART