RE: FR Switch problem from Nag on 2009-10-16 (Ccielab archives 10/2009)

From: Nag <nagendra.cisco_at_gmail.com>
Date: Thu, 15 Oct 2009 21:43:14 -0700

Jaz,

Hav not tried this. But technically the interface between FRSW should be
NNI. Can you try that?.

Regards,
Nagendra

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of JAZ
Sent: Thursday, October 15, 2009 9:05 PM
To: Cisco certification
Subject: FR Switch problem

Guys ,
Need ur help ... I am trying to configure FR switch.
I am using IE methord
(http://www.internetworkexpert.com/resources/compound.frame-relay.htm)
to join 2 router to make 1 FR sw.

But, always PVC STATUS = INACTIVE

Here is the connectivity

R1-----FRSW ---FRSW1 ----R7

But, if tried to connect R1 to R2 (on single FR sw ... works fine)
..... looks like soem tunnel issue ... but I am unable to find .....

Can anyone help me please..................

Thanks
Jaz

FRSW:
============================================================================
===================
FRSW#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(10), RELEASE SOFTWARE
(fc3)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 17-Aug-04 03:58 by kellythw
Image text-base: 0x03094A1C, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)

FRSW uptime is 1 hour, 14 minutes
System returned to ROM by reload
System image file is "flash:/c2500-is-l.123-10.bin"

cisco 2520 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 10351051, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

FRSW#sh run
Building configuration...

Current configuration : 2324 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname FRSW
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
ip subnet-zero
!
frame-relay switching
!
!
!
interface Tunnel0
no ip address
tunnel source Async4
tunnel destination 12.0.0.2
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
description To R1
no ip address
encapsulation frame-relay
no ip route-cache
clockrate 64000
no fair-queue
frame-relay intf-type dce
frame-relay route 102 interface Serial1 201
frame-relay route 106 interface Serial2 601
frame-relay route 107 interface Tunnel0 701
frame-relay route 108 interface Tunnel0 801
frame-relay route 109 interface Tunnel0 901
frame-relay route 116 interface Serial3 611
!
interface Serial1
description To R2
no ip address
encapsulation frame-relay
no ip route-cache
shutdown
clockrate 64000
frame-relay intf-type dce
frame-relay route 201 interface Serial0 102
frame-relay route 206 interface Serial2 602
frame-relay route 207 interface Tunnel0 702
frame-relay route 208 interface Tunnel0 802
frame-relay route 209 interface Tunnel0 902
frame-relay route 226 interface Serial3 622
!
interface Serial2
description Connected to R6-S0
no ip address
encapsulation frame-relay
no ip route-cache
shutdown
clockrate 64000
frame-relay intf-type dce
frame-relay route 601 interface Serial0 106
frame-relay route 602 interface Serial1 206
frame-relay route 607 interface Tunnel0 706
frame-relay route 608 interface Tunnel0 806
frame-relay route 609 interface Tunnel0 906
!
interface Serial3
description Connected to Rack1R6-s1
no ip address
encapsulation frame-relay
no ip route-cache
shutdown
clockrate 64000
frame-relay intf-type dce
frame-relay route 611 interface Serial0 116
frame-relay route 622 interface Serial1 226
frame-relay route 667 interface Tunnel0 766
frame-relay route 668 interface Tunnel0 866
frame-relay route 669 interface Tunnel0 966
!
interface BRI0
no ip address
shutdown
!
interface Async4
ip address 12.0.0.1 255.0.0.0
async dynamic routing
async mode dedicated
!
ip http server
ip classless
!
!
!
!
line con 0
exec-timeout 0 0
line aux 0
modem InOut
transport input all
speed 38400
flowcontrol hardware
line vty 0 4
login
!
end
FRSW#sh ip int brief
Interface IP-Address OK? Method Status
     Protocol
Async4 12.0.0.1 YES manual up
     up
BRI0 unassigned YES unset administratively
down down
BRI0:1 unassigned YES unset administratively
down down
BRI0:2 unassigned YES unset administratively
down down
Ethernet0 unassigned YES unset administratively
down down
Serial0 unassigned YES manual up
     up
Serial1 unassigned YES manual administratively
down down
Serial2 unassigned YES manual administratively
down down
Serial3 unassigned YES manual administratively
down down
Tunnel0 unassigned YES unset up
up

FRSW#ping 12.0.0.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 12.0.0.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 72/72/72 ms

============================================================================
==========================

FRSW1:

============================================================================
==========================

FRSW1'#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.2(26c), RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Mon 30-Jul-07 17:24 by ccai
Image text-base: 0x03065AE8, data-base: 0x00001000

ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTLDR: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c),
RELEASE SOFTWARE (fc1)

FRSW1' uptime is 1 hour, 19 minutes
System returned to ROM by reload
System image file is "flash:/c2500-is-l.122-26c.bin"

cisco 2520 (68030) processor (revision N) with 14336K/2048K bytes of memory.
Processor board ID 17194821, with hardware revision 00000003
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)

Configuration register is 0x2102

FRSW1'#sh r
01:18:24: %SYS-5-CONFIG_I: Configured from console by consoleun
Building configuration...

Current configuration : 1900 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname FRSW1'
!
!
ip subnet-zero
!
frame-relay switching
!
!
!
interface Tunnel0
no ip address
tunnel source Async4
tunnel destination 12.0.0.1
!
interface Ethernet0
no ip address
shutdown
!
interface Serial0
description To R7
no ip address
encapsulation frame-relay
no fair-queue
clockrate 64000
frame-relay intf-type dce
frame-relay route 701 interface Tunnel0 107
frame-relay route 702 interface Tunnel0 207
frame-relay route 706 interface Tunnel0 607
frame-relay route 708 interface Serial1 807
frame-relay route 709 interface Serial2 907
frame-relay route 766 interface Tunnel0 667
!
interface Serial1
description To R8
no ip address
encapsulation frame-relay
shutdown
clockrate 64000
frame-relay intf-type dce
frame-relay route 801 interface Tunnel0 108
frame-relay route 802 interface Tunnel0 208
frame-relay route 806 interface Tunnel0 608
frame-relay route 807 interface Serial0 708
frame-relay route 809 interface Serial2 908
frame-relay route 866 interface Tunnel0 668
!
interface Serial2
description To R4
no ip address
encapsulation frame-relay
shutdown
clockrate 64000
frame-relay intf-type dce
frame-relay route 901 interface Tunnel0 109
frame-relay route 902 interface Tunnel0 209
frame-relay route 906 interface Tunnel0 609
frame-relay route 907 interface Serial0 709
frame-relay route 908 interface Serial1 809
frame-relay route 966 interface Tunnel0 669
!
interface Serial3
no ip address
shutdown
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
!
interface Async4
ip address 12.0.0.2 255.0.0.0
encapsulation slip
async dynamic routing
async mode dedicated
!
ip classless
ip http server
!
!
line con 0
line aux 0
modem InOut
transport input all
speed 38400
flowcontrol hardware
line vty 0 4
login
!
end

FRSW1'#sh ip int brief
Interface IP-Address OK? Method Status
     Protocol
Async4 12.0.0.2 YES manual up
     up
BRI0 unassigned YES unset administratively
down down
BRI0:1 unassigned YES unset administratively
down down
BRI0:2 unassigned YES unset administratively
down down
Ethernet0 unassigned YES unset administratively
down down
Serial0 unassigned YES manual up
     up
Serial1 unassigned YES manual administratively
down down
Serial2 unassigned YES manual administratively
down down
Serial3 unassigned YES unset administratively
down down
Tunnel0 unassigned YES unset up
     up
FRSW1'#ping 12.0.0.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 12.0.0.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 72/73/80 ms

============================================================================
=========================
R1:
R1#sh run
*Mar 1 19:41:06.843: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...

Current configuration : 643 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface Serial0/0
ip address 172.1.17.1 255.255.255.0
encapsulation frame-relay
frame-relay map ip 172.1.17.7 107 broadcast
!
interface Ethernet0/1
no ip address
shutdown
half-duplex
!
ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
!
end

R1#sh fram map
Serial0/0 (up): ip 172.1.17.7 dlci 107(0x6B,0x18B0), static,
broadcast,
CISCO, status defined, inactive
R1#sh fram pvc

PVC Statistics for interface Serial0/0 (Frame Relay DTE)

              Active Inactive Deleted Static
  Local 0 1 0 0
  Switched 0 0 0 0
  Unused 0 5 0 0

DLCI = 102, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

  input pkts 0 output pkts 0 in bytes 0
  out bytes 0 dropped pkts 0 in pkts dropped 0
  out pkts dropped 0 out bytes dropped 0
  in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
  out BECN pkts 0 in DE pkts 0 out DE pkts 0
  out bcast pkts 0 out bcast bytes 0
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  pvc create time 00:13:54, last time pvc status changed 00:13:34

DLCI = 106, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

DLCI = 107, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0

DLCI = 108, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

DLCI = 109, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

DLCI = 116, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
  Invalid Unnumbered info 0 Invalid Prot Disc 0
  Invalid dummy Call Ref 0 Invalid Msg Type 0
  Invalid Status Message 0 Invalid Lock Shift 0
  Invalid Information ID 0 Invalid Report IE Len 0
  Invalid Report Request 0 Invalid Keep IE Len 0
  Num Status Enq. Sent 504 Num Status msgs Rcvd 489
  Num Update Status Rcvd 0 Num Status Timeouts 15
  Last Full Status Req 00:00:54 Last Full Status Rcvd 00:00:54
R1#sh ip int b
Interface IP-Address OK? Method Status
     Protocol
Ethernet0/0 unassigned YES NVRAM administratively
down down
Serial0/0 172.1.17.1 YES NVRAM up
     up
Ethernet0/1 unassigned YES NVRAM administratively
down down

============================================================================
=======================
R7:
R7#sh run
Building configuration...

Current configuration : 784 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R7
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
!
ip cef
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Serial0/0
ip address 172.1.17.7 255.255.255.0
encapsulation frame-relay
frame-relay map ip 172.1.17.1 701 broadcast
!
interface Serial0/1
no ip address
shutdown
!
interface Serial0/2
no ip address
shutdown
!
interface Serial0/3
no ip address
shutdown
!
interface Ethernet1/0
no ip address
shutdown
half-duplex
!
interface Ethernet1/1
no ip address
shutdown
half-duplex
!
ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
!
!
!
!
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
!
end

R7#sh fram map
Serial0/0 (up): ip 172.1.17.1 dlci 701(0x2BD,0xACD0), static,
broadcast,
CISCO, status defined, inactive
R7#sh fram pvc

PVC Statistics for interface Serial0/0 (Frame Relay DTE)

              Active Inactive Deleted Static
  Local 0 2 0 0
  Switched 0 0 0 0
  Unused 0 3 0 0

DLCI = 701, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0

DLCI = 706, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

DLCI = 708, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0/0

  input pkts 1 output pkts 1 in bytes 34
  out bytes 34 dropped pkts 0 in pkts dropped 0
  out pkts dropped 0 out bytes dropped 0
  in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
  out BECN pkts 0 in DE pkts 0 out DE pkts 0
  out bcast pkts 1 out bcast bytes 34
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
  pvc create time 01:36:35, last time pvc status changed 01:03:01

DLCI = 709, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

DLCI = 766, DLCI USAGE = UNUSED, PVC STATUS = INACTIVE, INTERFACE =
Serial0/0

LMI Statistics for interface Serial0/0 (Frame Relay DTE) LMI TYPE = CISCO
  Invalid Unnumbered info 0 Invalid Prot Disc 0
  Invalid dummy Call Ref 0 Invalid Msg Type 0
  Invalid Status Message 0 Invalid Lock Shift 0
  Invalid Information ID 0 Invalid Report IE Len 0
  Invalid Report Request 0 Invalid Keep IE Len 0
  Num Status Enq. Sent 521 Num Status msgs Rcvd 433
  Num Update Status Rcvd 0 Num Status Timeouts 89
  Last Full Status Req 00:00:11 Last Full Status Rcvd 00:00:11
R7#sh ip int b
Interface IP-Address OK? Method Status
     Protocol
Serial0/0 172.1.17.7 YES NVRAM up
     up
Serial0/1 unassigned YES NVRAM administratively
down down
Serial0/2 unassigned YES NVRAM administratively
down down
Serial0/3 unassigned YES NVRAM administratively
down down
Ethernet1/0 unassigned YES NVRAM administratively
down down
Ethernet1/1 unassigned YES NVRAM administratively
down down
R7#

Blogs and organic groups at http://www.ccie.net
Received on Thu Oct 15 2009 - 21:43:14 ART

This archive was generated by hypermail 2.2.0 : Sun Nov 01 2009 - 07:51:00 ART