OT: VPN Concentrator with VPN Clients

Hello Experts,

Sorry about back to back OT posts but maybe I am too dumb for this crap and
someone can help me with this.... I am trying to configure CVPN 3030
Concentrator to work with either Microsoft vpn client or Cisco VPN client
5.0.03.

I have configured two groups: 1) pptp to work with MS and 2) IPSecGroup to
work with the cisco vpn client. I cannot make any connection with ms vpn
client, however, I am able to authenticate with active directory and get an
ip address from our internal dhcp server when I use cisco vpn client(ip sec
group). After the connection is established, I cannot ping or browse any
servers behind the concentrator. I even tried different subnet dhcp range
and adding static routes on the concentrator and router behind it (local
LAN) but no go.

I have tried following the cisco documents to the last letter, google search
and I tried configuring it using my own understanding of this but no luck.
Is there some setting that I am missing in the concentrator? I don't care
which client I use (MS preferred) as long as concentrator can intelligently
pass traffic through to the other side as it is with the 4 site to site
VPNs.

regards,

Haroon

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 07 2009 - 11:56:09 ART