RE: FRTS

Mohan,

With FRTS, the bandwidth statement on the serial interface is cosmetic for your reference when doing a show interface. I would say the intent of that question is to figure out the BE values to be used.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of MDevarajan_at_inautix.co.in
Sent: Wednesday, October 07, 2009 9:43 AM
To: ccielab_at_groupstudy.com
Cc: Cisco certification; nobody_at_groupstudy.com
Subject: FRTS

Team ..

If we have asked to the below question .. Do we need to set the BW for
serial interface to 512000 Kbs..?? Please advise...

R2bs connection to the Frame Relay cloud has a port speed of 512Kbps
o R2 has had a CIR of 128Kbps provisioned for DLCI 204 by the telco
o R4bs connection to the Frame Relay cloud has a port speed of 512Kbps
o R4 has had a CIR of 128Kbps provisioned for DLCI 402 by the telco

Thanks in Advance,
Mohan

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 07 2009 - 09:59:31 ART