Re: Trouble with auto 6 to 4 tunnels

this shud help
http://ardenpackeer.com/routing-protocols/tutorial-ipv6-tunnels-part-2-automatic-6to4-tunnels/

On Sun, Sep 27, 2009 at 9:24 AM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> Hey team,
>
> I hope this email finds each one of you doing well.
>
> Team, I had some trouble trying to learn / configure auto 6 to 4 tunnels.
> The scenario was a ASET lab, number 5. There were two pockets of RIPNG and
> these needed to be connected using auto 6 to 4 tunnels.
>
> I stumbled, failed, etc ... at the end of this lab, I hoped that perhaps
> this would only be a 2 of 3 point task at most ... ;-)
>
> Regular tunnels, no problem, running IPv6 over the tunnel with routing
> protocols, no problem. Auto tunnels ... problem.
>
> A couple of questions and advice please.
>
> 1) what is a good source for online examples / learning? I did not find
> the
> documentation very helpful. In fact the config example was confusing to
> me.
>
> 2) the tunnel source equaled the loopback0.
> 3) no tunnel destination defined?
> 4) the IPv6 address equaled the remote router's loopback? The remote side
> was also confugred with a tunnel source of loopback0
>
> So, I am missing something. I would like to work on this in the next few
> days so anything you all can advise or comment on would be most
> appreciated. Many thanks
>
> Andrew Lee Lissitz
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sent from Karnataka, India
Spike Milligan <http://www.quotationspage.com/quote/23642.html>  - "Money
can't buy friends, but it can get you a better class of enemy."
Blogs and organic groups at http://www.ccie.net