RE: DNS issue?

Tyson: Thanks for the info, this will be really helpful!!
r/manoj

-----Original Message-----
From: Tyson Scott [mailto:tscott_at_ipexpert.com]
Sent: Wednesday, September 23, 2009 9:50 PM
To: 'Iwan Hoogendoorn'; Nanda, Manoj (DS-1)
Cc: 'Cisco certification'
Subject: RE: DNS issue?

Manoj,

This is done on purpose for optimization of results based on country. If
you want to always use US search engine you need to customize your settings.
The article below is instructions to do so.

http://www.google.com/support/websearch/bin/answer.py?hl=en&answer=873

Regards,
 
Tyson Scott - CCIE #13513 R&S and Security
Technical Instructor - IPexpert, Inc.

Telephone: +1.810.326.1444
Cell: +1.248.504.7309
Fax: +1.810.454.0130
Mailto: tscott_at_ipexpert.com
 

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Iwan
Hoogendoorn
Sent: Wednesday, September 23, 2009 4:39 AM
To: Nanda, Manoj (DS-1)
Cc: Cisco certification
Subject: Re: DNS issue?

I think you should ask RIPE for clarification for this ...

-- 
Regards,
Iwan Hoogendoorn
CCIE #13084 (R&S / Security / SP)
Sr. Support Engineer  IPexpert, Inc.
URL: http://www.IPexpert.com
On Tue, Sep 22, 2009 at 10:39 PM, Nanda, Manoj (DS-1)
<Manoj.Nanda_at_drs-defensesolutions.com> wrote:
> Guys: I have a real life issue, customers using RIPE addresses and they
> see the web page in German and the search contents from Europe. The
> customer wants to see US Google web page and also the search results. I
> was initially thinking it could be a DNS issue but looks like something
> else plays a role here. Any help will be greatly appreciated.
> r/Manoj
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Piotr Matusiak
> Sent: Tuesday, September 22, 2009 12:34 PM
> To: Antonio Soares
> Cc: GAURAV MADAN; Cisco certification
> Subject: Re: Dynamips for SP
>
> Hi Antonio,
>
> Take a look at your own website:
> http://www.ccie18473.net/dynamips/dynamips.htm#atom-atmompls-aal5
>
> Comments:
> Not possible to achieve with Dynamips.
>
> Regards,
> --
> Piotr Matusiak
> CCIE #19860 (R&S, SEC)
>
>
> 2009/9/22 Antonio Soares <amsoares_at_netcabo.pt>:
>> You can do AToM:
>>
>> http://www.ccie18473.net/
>>
>> See the mini-scenarios section.
>>
>>
>> Regards,
>>
>> Antonio Soares, CCIE #18473 (R&S)
>> amsoares_at_netcabo.pt
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> Of Piotr Matusiak
>> Sent: terga-feira, 22 de Setembro de 2009 15:06
>> To: GAURAV MADAN
>> Cc: Cisco certification
>> Subject: Re: Dynamips for SP
>>
>> Hi Gaurav,
>>
>> A. I use Dell XPS M1330 laptop and running GNS3/Dynamips under Ubuntu
> and Windows Vista. There is Core2Duo 2x2.4 CPU, 4GB of RAM,
>> 7200rpm HDD and GNS3 works smooth on this. The difference between
> Linux and Windows is in stability. I can successfully run 14
>> routers under Ubuntu while I can only run 6-8 under Windows.
>>
>> B. More info:
>> http://7200emu.hacki.at
>> http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator
>> http://www.gns3.net/
>>
>> C. Then number of devices depends on the platform and software
> requirements. For example you can run less 7200 with 12.4T ADV ENT
>> software than 2600 with IP Base IOS. For SP I used 7200 with 12.2S and
> I can run 10-12 routers under Ubuntu without any problems.
>>
>> D. No chance for LS1010 emulation, but you can simulate basic ATM
> interfaces with virtual ATM switch (again basic functionality, no
>> advanced config). You cannot simulate AToM and some L2VPNs.
>>
>> E. I only run my own topology, but it is similar to IPE.
>>
>> F. Building virtual rack from scratch is a matter of 10min especially
> under GNS3. If you want to use Dynamips and play with manually
>> created NET files, this can take 2hrs and you can make lots of
> mistakes.
>>
>> HTH,
>>
>> --
>> Piotr Matusiak
>> CCIE #19860 (R&S, SEC)
>>
>>
>>
>>
>> 2009/9/22 GAURAV MADAN <gauravmadan1177_at_gmail.com>:
>>> Hi Friends
>>>
>>> I am a CCIE R$S and while studying for R$S ; I practiced on real
> stuff
>>> . No dynamips
>>>
>>> Now that I wish to learn some SP stuff ; I am in resource crunch and
>>> heard of dynamips ..
>>>
>>> Can you guys please answer following ques
>>>
>>> [A] I can buy a PC ? whats the best config I shd go for . I say best
>>> keeping in mind the future use as well ? Ppl running on laptops
> please
>>> let me know how good / bad experice is ?
>>>
>>> [B] Where can I get the documentation of how to setup the things on
> my new PC ?
>>>
>>> [C] How many devices can I simulate ?
>>>
>>> [D] Can we simulate ATM stuff like LS1010 as well ?
>>>
>>> [E] Are there people who have simulated vendors like INE / IPE
>>> topologies for SP lab on dynamips .. How good is their experience ?
>>>
>>> [F] Lastly ; how long will this take and in hiw much time can i be
>>> accessing real stuff :)
>>>
>>> I am sure these questions are silly for l already using this ,, But
>>> cant help .. I need to get this working ,,
>>>
>>> Gaurav Madan.
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>>
> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>>
> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net