RE: SPAN on 3560 - enable traffic forwarding on destination

I had issues with this recently on 12.2(44)SE6. What version are you running?

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of ZZ
Sent: Friday, September 11, 2009 9:13 AM
To: Cisco certification
Subject: Re: SPAN on 3560 - enable traffic forwarding on destination port

no solution? nobody?

ZZ

On Thu, Sep 10, 2009 at 2:08 PM, ZZ <zurabz_at_gmail.com> wrote:

> Hello Experts,
>
> I'm having hard time configuring SPAN on switch and the same time enabling
> traffic forwarding on my PC (Wireshark which is destinasion span session).
>
> Here is the config:
>
> Rack1SW3#sh run | i moni
>
> monitor session 1 source interface Gi0/24
> monitor session 1 destination interface Gi0/1 ingress untagged vlan 146
>
> interface GigabitEthernet0/1
> description PC_Wireshark
> switchport access vlan 146
> switchport mode access
> spanning-tree portfast
> end
>
> interface GigabitEthernet0/24
> switchport access vlan 43
> switchport mode access
> spanning-tree portfast
> end
>
> As soon as I enable SPAN I see traffic on Wireshark but don't have an
> access to any device on the LAN.
>
> Kindly let me know what I'm missing.
>
> Thanks,
> ZZ

Blogs and organic groups at http://www.ccie.net
Received on Fri Sep 11 2009 - 09:35:47 ART