Re: per vlan based qos classification/marking on 3560?

Sorry I do not have an example handy. I'll try and find one.

Take a look into vlan maps.

It will be something like this.
acl
vlan-map
vlan access filter.

*As I learn more I remember less. I guess my token bucket is rather small. *

On Thu, Sep 10, 2009 at 2:46 PM, CCIE League <ccieleague_at_ymail.com> wrote:

> Experts,
>
> How to classify & mark all traffic for only vlan 99 with anything e.g. ip
> prec 5 on a "3560" switch... SW4?
>
>
> Setup:
>
> Vlan99----SW1-----isl trunk and ether channel-----SW4
>
>
> - i have enabled "mls qos vlan-based" on the ALL trunk ports on SW4. Can't
> use "mls qos vlan-based" on Port Channel?
>
> - SW4 can reach vlan99 via IGP... traffic destined to vlan 999 routed via
> vlan 100.
>
> - I have created ACL ANY1 with permit any on SW4
>
> - Defined Class-map CM_ANY
> match access-group name ANY1
>
> - Defined Policy-map PM_MARK
> Class CM_ANY
> set ip prece 5
>
> - Created int vlan 99 on SW4
>
> - Under int vlan 99
> service-policy input PM_MARK
>
> #show policy-map interface vlan 99 doesn't show any packets marked!! All
> is showing 0.
>
>
> Have i missed anything? Any tricks?
>
>
> Followed steps on:
> http://blog.internetworkexpert.com/tag/per-vlan/
>
> I have also tried to use Class-map with "match interface f0/19 - f0/24 as
> mentioned in example 6.
>
> Ta,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Sep 10 2009 - 15:01:01 ART