Re: Show interfaces virtual-access

Hi Anantha,

A very good question ... now I am also curious ...

-- 
Regards,
Iwan Hoogendoorn
CCIE #13084 (R&S / Security / SP)
Sr. Support Engineer  IPexpert, Inc.
URL: http://www.IPexpert.com
On Wed, Sep 9, 2009 at 3:21 PM, Anantha Subramanian
Natarajan<anantha.natarajan_at_gravitant.com> wrote:
> Hi All,
>
>   I am just curious to understand what is meant by vaccess status 0x44
> means in the below output.Actually I even remember seeing on PPPOFR
> interface output.Is it something specifies the virtiual-access is in UP
> state or ?......Normally I refer the LCP open and open:IPCP has indications
> of the PPP is fine,but just want to understand whether vacess field helps in
> any sort of troubleshooting or have significant meaning .
>
>
> Router# show interfaces virtual-access 3 (output truncated)
> Virtual-Access3 is up, line protocol is up
>  Hardware is Virtual Access interface
>  Encapsulation PPP, LCP Open, multilink Open
>  Link is a member of Multilink bundle Virtual-Access4
>  PPPoATM vaccess, cloned from Virtual-Template1
>  *Vaccess status 0x44*
>  Bound to ATM4/0.10000 VCD:16, VPI:15, VCI:200, loopback not set
>
>
> Thank You for the help
>
> Regards
>
> Anantha Subramanian Natarajan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net