Re: Strange status of EtherChannel!

@Nicky -- Hey, at the place you pulled that practice question did they have
an answer? I have yet to find it in the documentation either and was
curious. Thanks!

On Thu, Aug 27, 2009 at 9:28 AM, But Nicky <lyredhair_at_gmail.com> wrote:

> Dear all,
>
> SW2(config)#do sh eth summ
> Flags: D - down P - in port-channel
> I - stand-alone s - suspended
> H - Hot-standby (LACP only)
> R - Layer3 S - Layer2
> U - in use f - failed to allocate aggregato
> U - unsuitable for bundling
> W - waiting to be aggregated
> D - default port
> Number of channel-groups in use: 1
> Number of aggregators: 1
> Group Port-channel Protocol Ports
>
> ------+-------------+-----------+-----------------------------------------------
>
> 12 Po12(SU) - Fa0/19(P) Fa0/20(P) Fa0/21(P) Fa0/22(P)
> Fa0/23() Fa0/24(P) Fa0/25P)
> Fa0/26(P)
>
>
> Each interface are shown as (P), except F0/23 (),What is the status of
> F0/23? I have not saw it before, please help.
>
> Many thanks,
> But Nguyen.
>
> P/S: This is question for OEQ, which I collected from internet, do not
> require posting the configuration.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Joe Astorino - CCIE #24347 R&S
Technical Instructor - IPexpert, Inc.
Cell: +1.586.212.6107
Fax: +1.810.454.0130
Mailto:  jastorino_at_ipexpert.com
Blogs and organic groups at http://www.ccie.net