According to the MSDP spec (and I thought it used to be on the DocCD) if
you have more than two peers you need MBGP. Actually, you don't, but it
makes things more efficient if you run it. ;)
On the v4 blueprint, I'd see it as a possibility but not necessarily a
requirement. v3, no worries.
HTH,
*Scott Morris*, CCIE/x4/ (R&S/ISP-Dial/Security/Service Provider) #4713,
JNCIE-M #153, JNCIS-ER, CISSP, et al.
JNCI-M, JNCI-ER
evil_at_ine.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
Rookie Ccie wrote:
> Dear Experts,
>
> Please let me know whether I need BGP on the network to enable Anycast RP
> withing a single PIM SM domain or will it be ok with OSPF. BGP requirement
> is not mentioned on Cisco Doc's.
>
> http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_basic_cfg_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1062999
>
> Rgds
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 30 2009 - 16:08:50 ART
This archive was generated by hypermail 2.2.0 : Tue Sep 01 2009 - 05:43:57 ART