Re: Conditional Advertise

One thing is sure that same line is O, when we assign two ACL under one
clause, it is shown in one line and treated as OR.

On Sat, Aug 29, 2009 at 7:53 AM, Anantha Subramanian Natarajan <
anantha.natarajan_at_gravitant.com> wrote:

> Hi Sugar Can,
>
> Can you try inside the route-map as below
>
> Match ip address prefix-list <prefix-list1><prefix-list2>
>
> I think whenever we specify the match criteria on same line ,it is an AND
> operation
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sat, Aug 29, 2009 at 12:57 AM, Sagar Rane <sagar.ccie_at_gmail.com> wrote:
>
> > Hi All,
> >
> > I have requirement where, bgp should check its bgp routing table for two
> > routes eq (10.1.1.0/24 and 20.2.2.2/32) and only if both routes are
> > present,
> > it should originate a route advertisement of 192.168.10.0/24.
> >
> > I have tried advertise-map and exist map, but how can we used exist-map
> to
> > check both the routes at the same time?
> >
> > Anyway how we can meet this requirement please let me know.
> >
> > Regards,
> > Sagar
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Aug 29 2009 - 08:12:38 ART