RE: Auto RP with sparse-mode and no dm-fallback..and its

Using "no ip pim dm-fallback" would not have any bearing since you are using sparse mode (you would need sparse-dense mode for this command to have an effect).

Have you configured the "ip pim autorp-listener" command? Also which router is your mapping agent?

________________________________________
From: nobody_at_groupstudy.com [nobody_at_groupstudy.com] On Behalf Of Mohamed El Henawy [m.henawy_at_link.net]
Sent: Tuesday, August 25, 2009 4:09 PM
To: Cisco certification
Subject: Auto RP with sparse-mode and no dm-fallback..and its working

Hello Group ,

this might be a silly question but...still I wish to learn how :) ..I'm tired
of multicast really

I have this setup

f0/0--R1----LAN-----R2-----FR-----R3---LAN---R5

- I have put ip pim sparse mode on the interfaces
- configured auto rp on R2 with specific ACL
-put no ip pim dm-fallback on R2 & R3
-Join the group I permitted with the ACL on R1 F0/0

my question is ....how come ( without any pings from R3 ) I see the rp mapping
on R3 & R5 ? if I'm blocking the 39 & 40 groups as I'm using ACL with the RP (
correct ? ) and I'm putting no ip pim dm-fallback

where is the trick ?

Thanks....

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 25 2009 - 17:12:48 ART