Re: Dot1x Auth-Fail-Vlan is not supported on multi-host mode

SW1#sh ver
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SED, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 22-Oct-05 12:14 by yenanh
Image text-base: 0x00003000, data-base: 0x00D6EDC8
ROM: Bootstrap program is C3550 boot loader
SW1 uptime is 1 week, 1 day, 41 minutes
System returned to ROM by power-on
System image file is "flash:c3550-ipservicesk9-mz.122-25.SED.bin"

 Cisco WS-C3550-24 (PowerPC) processor (revision L0) with 65526K/8192K bytes of memory.
Processor board ID CAT0813N14D
Last reset from warm-reset
Running Layer2/3 Switching Image
          

24 FastEthernet interfaces
2 Gigabit Ethernet interfaces
          
The password-recovery mechanism is enabled.
384K bytes of flash-simulated NVRAM.
Base ethernet MAC Address: 00:0F:90:23:52:80
Motherboard assembly number: 73-5700-11
Power supply part number: 34-0966-04
Motherboard serial number: CAT08120MFP
Power supply serial number: DTH08113BTH
Model revision number: L0
Motherboard revision number: A0
Model number: WS-C3550-24-SMI
System serial number: CAT0813N14D
Configuration register is 0x10F

________________________________
From: Darby Weaver <darby.weaver_at_gmail.com>
To: CCIE League <ccieleague_at_ymail.com>
Cc: CCIEGS <ccielab_at_groupstudy.com>
Sent: Sunday, 23 August, 2009 23:26:36
Subject: Re: Dot1x Auth-Fail-Vlan is not supported on multi-host mode

What version of IOS?

I recall configuring this using multi-host without getting errors?

On Sun, Aug 23, 2009 at 3:56 PM, CCIE League <ccieleague_at_ymail.com> wrote:

I am getting the following message when setting Auth fail VLAN where i have to config multi-host support also.
>
>
>
>SW1(config-if)#dot1x auth-fail vlan 99
>
>Command rejected: Port is in multi-host mode
>
>Dot1x Auth-Fail-Vlan is not supported on multi-host mode
>
>
>--------Config --------------
>aaa new-model
>aaa authentication dot1x default group radius
>
>dot1x system-auth-control
>dot1x guest-vlan supplicant
>!
>interface FastEthernet0/14
> switchport mode access
> dot1x port-control auto
> dot1x host-mode multi-host
> dot1x guest-vlan 99
> spanning-tree portfast
>
>------------------------------------------------
>
>
>
>
>Thanks for your help...
>
>
>Blogs and organic groups at http://www.ccie.net
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 23 2009 - 23:02:03 ART