Re: filtering in eigrp

I can not ping one of my BB routers after redistributing mutually between
two routing protocols(EIGRP 10 <> EIGRP 100) and restricting what routes go
to each protocol. I only see the routes I am supposed to see.

I do see the route to the BB on all my routers. I can ping it from my
connected interface but I can not ping it from my other routers unless I do
a sourced ping using the local loopback.

What am I overlooking?

On Fri, Aug 21, 2009 at 5:59 PM, Mark Matters <markccie_at_gmail.com> wrote:

> ok send it over.
>
>
> On Fri, Aug 21, 2009 at 5:11 PM, Narbik Kocharians <narbikk_at_gmail.com>wrote:
>
>> I can send you a lab if you like
>>
>>
>> On Fri, Aug 21, 2009 at 10:45 AM, Mark Matters <markccie_at_gmail.com>wrote:
>>
>>> Narbik,
>>>
>>> I have tried this and it did not change the distance. I tried changing
>>> the distance on a router where I was redistributing eigrp and
>>> ospf mutually on an EIGRP stub router. I tried changing it in EIGRP and I
>>> did not see a change. Then I tried it in OSPF and nothing. I'm not sure
>>> where I went wrong.
>>>
>>> I know there are rules as to where you put the distance command but my
>>> brain is like swiss cheese. I pour info in and it all leaks out.
>>>
>>>
>>> On Fri, Aug 21, 2009 at 12:46 PM, Narbik Kocharians <narbikk_at_gmail.com>wrote:
>>>
>>>> Don't forget the distance command.
>>>>
>>>>
>>>> On Fri, Aug 21, 2009 at 9:39 AM, Mark Matters <markccie_at_gmail.com>wrote:
>>>>
>>>>> Thanks!!!
>>>>>
>>>>> You guys at IPEXPERT are awesome!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Aug 21, 2009 at 12:15 PM, Iwan Hoogendoorn <iwan_at_ipexpert.com
>>>>> >wrote:
>>>>>
>>>>> > Dear Mark,
>>>>> >
>>>>> > You can filter EIGRP in the ways you provided
>>>>> >
>>>>> > - distribute-list
>>>>> > - redistribution with a route-map that looks at al prefix-list and/or
>>>>> > an access-list or you can even tag the route
>>>>> > - do a summery route
>>>>> >
>>>>> > But you can also go for the passive-interface command.
>>>>> > This way you only can only receive routes from your EIGRP neighbour
>>>>> > but not send anytin at all ... which is a kind of filtering in the
>>>>> end
>>>>> > ;-)
>>>>> >
>>>>> >
>>>>> > --
>>>>> > Regards,
>>>>> >
>>>>> > Iwan Hoogendoorn
>>>>> > CCIE #13084 (R&S / Security / SP)
>>>>> > Sr. Support Engineer IPexpert, Inc.
>>>>> > URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>>>> >
>>>>> >
>>>>> >
>>>>> > On Fri, Aug 21, 2009 at 5:57 PM, Mark Matters<markccie_at_gmail.com>
>>>>> wrote:
>>>>> > > How many ways can I filter routes in EIGRP?
>>>>> > >
>>>>> > > distribute-list
>>>>> > > redistribute / route-map / acl / ip prefix
>>>>> > > summary
>>>>> > >
>>>>> > >
>>>>> > > Are there any other ways?
>>>>> > >
>>>>> > >
>>>>> > > Blogs and organic groups at http://www.ccie.net
>>>>> > >
>>>>> > >
>>>>> _______________________________________________________________________
>>>>> > > Subscription information may be found at:
>>>>> > > http://www.groupstudy.com/list/CCIELab.html
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> > >
>>>>> >
>>>>> >
>>>>> >
>>>>> > --
>>>>> > Regards,
>>>>> >
>>>>> > Iwan Hoogendoorn
>>>>> > CCIE #13084 (R&S / Security / SP)
>>>>> > Sr. Support Engineer IPexpert, Inc.
>>>>> > URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>
>>>>> _______________________________________________________________________
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Narbik Kocharians
>>>> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
>>>> www.MicronicsTraining.com <http://www.micronicstraining.com/>
>>>> Sr. Technical Instructor
>>>>
>>>
>>>
>>
>>
>> --
>> Narbik Kocharians
>> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
>> www.MicronicsTraining.com
>> Sr. Technical Instructor

Blogs and organic groups at http://www.ccie.net
Received on Sat Aug 22 2009 - 04:08:34 ART