Re: Regarding auto-rp in pim sparse-dense mode

On Thu, Aug 20, 2009 at 8:57 PM, peter ehiwe <ccie.in.nigeria_at_gmail.com>wrote:

> HI Raghav,
> For auto-rp to work you need a mapping agent that is centrally located
> and from the information provided it appears that the auto-rp MA is
> not configured.
>
> Also take note of the flags associated with the show ip mroute command
> output.
>
> HTH
>
> On 8/21/09, Raghav Bhargava <raghavbhargava12_at_gmail.com> wrote:
> > Hi experts,
> > My topology is something like this:-
> >
> > R5 <---FR----.> R2<---Fa0/0-----Fa0/0----> R6
> >
> >
> > Now lets say i select R2 and R6 to be configured as the RP's for the
> group
> > 224.1.1.1 and i configure this on both of them
> >
> > ip pim send-rp-announce lo0 scope 4 group-list 1 interval 30
> > access-list 1 permit 224.1.1.1
> >
> >
> > so now my question is that on R5 if i do :---> show ip mroute 224.1.1.1,
> it
> > shows only 1 group which is (2.2.2.2, 224.1.1.1) which is from R2 but not
> > the other one which is R6( 6.6.6.6, 224.1.1.1)
> >
> > If I check on R2, I can see both the Groups.I couldn't figure out what
> could
> > be wrong??
> >
> > Is there something that I am missing. Please advise
> >
> > BTW Pim sparse-dense mode is configured on all the interface's.
> >
> >
> > --
> > Warm Regards
> > Raghav
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Warm Regards
> Peter.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Aug 20 2009 - 22:57:30 ART