trunk to server

From: testing3.141 <testing3.141_at_gmail.com>
Date: Mon, 17 Aug 2009 22:27:39 -0500

I have to create a trunk to a server over 2 ports from a Cisco 6513 access
switch. This trunk has to only allow 6 vlans on it. The server admin does
not know what type of trunk he needs. How should I configure the trunk and
the 2 physical ports on the trunk on the switch ? The switch is already
configured for everything else. I just need to know how to configure the
trunk and those 2 ports on the switch He told me his server's ip is
192.168.100.1 . gig speed

Thanks

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 17 2009 - 22:27:39 ART

This message: [ Message body ]
Next message: Tony Schaffran \(GS\): "RE: trunk to server"
Previous message: Thameem Maranveetil Parambath: "Re: any on going for r and s v4 from india ?"
Next in thread: Tony Schaffran \(GS\): "RE: trunk to server"
Maybe reply: Tony Schaffran \(GS\): "RE: trunk to server"
Maybe reply: netwkengr_at_gmail.com: "Re: trunk to server"
Maybe reply: testing3.141: "RE: trunk to server"
Maybe reply: netwkengr_at_gmail.com: "Re: trunk to server"
Maybe reply: Tony Schaffran \(GS\): "RE: trunk to server"
Maybe reply: Tony Schaffran \(GS\): "RE: trunk to server"
Maybe reply: Keegan.Holley_at_sungard.com: "RE: trunk to server"
Maybe reply: Pearson: "Re: trunk to server"
Maybe reply: Scott Morris: "Re: trunk to server"
Maybe reply: Marko Milivojevic: "Re: trunk to server"
Maybe reply: Keegan.Holley_at_sungard.com: "RE: trunk to server"
Maybe reply: Travis Niedens : "RE: trunk to server"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Tue Sep 01 2009 - 05:43:56 ART