RE: Regarding configuring DSP resrouces

VORack01R3#show inventory
NAME: "2811 chassis", DESCR: "2811 chassis"
PID: CISCO2811 , VID: NA, SN: FTX0913C1GL

NAME: "Two port E1 voice interface daughtercard with Drop & Insert and G.703
on Slot 0 SubSlot 0", DESCR: "Two port E1 voice interface daughtercard with
Drop & Insert and G.703"
PID: VWIC-2MFT-G703= , VID: 1.0, SN: 31893254

NAME: "WAN Interface Card - Serial 2T on Slot 0 SubSlot 2", DESCR: "WAN
Interface Card - Serial 2T"
PID: WIC-2T= , VID: 1.0, SN: 34244750

NAME: "PVDMII DSP SIMM with one DSP with half channel capcity on Slot 0
SubSlot 4", DESCR: "PVDMII DSP SIMM with one DSP with half channel capcity"
PID: PVDM2-8 , VID: V01 , SN: FOC102741QS

NAME: "AIM Service Engine 0", DESCR: "AIM Service Engine"
PID: AIM-CUE , VID: V01 , SN: FOC10120VRK

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Ryan
West
Sent: Monday, August 17, 2009 7:35 AM
To: CCIE; ccielab_at_groupstudy.com
Subject: RE: Regarding configuring DSP resrouces

Amin,

Please post a show inventory and show voice dsp group all.

Thanks,

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of CCIE
Sent: Monday, August 17, 2009 12:17 AM
To: ccielab_at_groupstudy.com
Subject: Regarding configuring DSP resrouces

Hi experts,

About the DSP resources that are available on the board of the 2800 router,
can't I configured them as a DSP resources for the CUCM, because I tired and
the maximum sessions under the profile are always zero:-

VORack01R3(config-dspfarm-profile)#maximum sessions ?

  <0-0> Number of sessions assigned to this profile

Any hints on that?

Regards,

Amin

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 17 2009 - 09:04:05 ART