Re: VRF ping fails to switch

Configuring "mpls ip" is not required to make VRF-Lite works. In fact,
it would even fail on some platforms, fully capable of VRF-Lite (Cat
3550 & Cat 3560)...

--
Marko
CCIE #18427 (SP)
My network blog: http://cisco.markom.info/
On Sun, Aug 16, 2009 at 17:57, Jesse Loggins<jlogginsccie_at_gmail.com> wrote:
> Geoff,
> The following configuration should give you what you need.
>
> conf t
> !
> mpls ip
> !
> ip vrf Test10:10
> rd 10:10
> route-target 10:10
> !
> !
> interface GigabitEthernet1/0
> B ip vrf forwarding Test
> B ip address 192.168.1.1 255.255.255.0
> no shut
> !
Blogs and organic groups at http://www.ccie.net