Re: Need Help with LWAP AP

Hi,

thanks you all.

i was able to resolve the problem with the clear lwap command which clear
the Lwap private-config and and the ip address of the WLAN controller it
associates with. before registering it with the new WLAN controller.

On Tue, Aug 11, 2009 at 2:32 PM, Alexei Monastyrnyi <alexeim73_at_gmail.com>wrote:

> Hi.
>
> If I get you right, your LWAPP keeps registering with the first controller.
>
> You have to check on the LWAPP registration procedure and see where the
> first WLC kicks in.
>
> This document might help
>
> http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806c9e51.shtml
>
> HTH
> A.
>
>
>
> Abdul Muhammed wrote:
>
>> Hi GS,
>>
>> I need to remove an LWAP enable AP associated to a WLAN controller to
>> another WLAN controller,
>>
>> I demoted the AP to autonomous and upgrade it again, but will not allow me
>> to associate it with the the new WLAN controller.
>>
>> The command lwap ap controller ip address is being rejected.
>>
>> please help.
>>
>>
>>
>

-- 
Cherish your visions and your dreams as they are the children of your soul,
the blueprints of your ultimate achievements. "Napoleon Hill"
There are no limitations to the mind except those we acknowledge; both
poverty and riches are the offspring of thought. "Napoleon Hill"
Abdul Muhammed Murtala
American University of Nigeria
Lamido Zubairu way, Yola
Adamawa
+2348052001153, +2348056201237
Network Manager
MCSE,MCDBA,MCSA,OCPDBA,CCNA,CCIE Written.
Blogs and organic groups at http://www.ccie.net