Re: switchport port-security violation shutdown vlan

Hi Somyot

The function of switch port violation shutdown is that it puts the
port in an err disable mode immediately the maximum command is
exceeded or violated, making the user who plugs in or the device
plugged in not to receive any frame.

I hope this helps.

Tobi Babs

On 8/11/09, Somyot Ch <somyot.ch_at_gmail.com> wrote:
> Hi guy,
> Anyone can explain function of command "switchport port-security violation
> shutdown vlan" when vilolation is occured ??
> This is example of usage but I don't sure actually function.
> Switch#configure terminal
> Switch(config)#interface fastEthernet 0/3
> Switch(config-if)#switchport mode access
> Switch(config-if)#switchport access vlan 10
> Switch(config-if)#switchport voice vlan 101
> Switch(config-if)#switchport port-security
> Switch(config-if)#switchport port-security maximum 3
> Switch(config-if)#switchport port-security maximum 2 vlan access
> Switch(config-if)#switchport port-security maximum 1 vlan voice
> Switch(config-if)#switchport port-security violation shutdown vlan
> Switch(config-if)#switchport port-security mac-address 0000.0203.0405 vlan
> access
> Switch(config-if)#switchport port-security mac-address 0000.0304.0506 vlan
> voice
> Switch(config-if)#switchport port-security mac-address 0000.0304.0506 vlan
> access
> Switch(config-if)#end
>
> Cheers,
> Somyot
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 11 2009 - 08:59:33 ART