Re: HSRP..Standby routers should not know Standby address !

Wait, what?

I don't understand:

Rack1R4#show standby
Ethernet0/1 - Group 1
  State is Listen
  Virtual IP address is 155.1.146.100* (learnt)*
  Active virtual MAC address is 0000.0c07.ac01
    Local virtual MAC address is 0000.0c07.ac01 (v1 default)
  Hello time 3 sec, hold time 10 sec
  *Authentication text "CISCO"*
  Preemption disabled
  Active router is 155.1.146.1, priority 120 (expires in 9.500 sec)
  Standby router is unknown
  *Priority 80 (configured 80)*
  IP redundancy name is "hsrp-Et0/1-1" (default)

I'd love to see the original question.

On Tue, Aug 11, 2009 at 4:19 AM, kaushalccie patel <kaushalccie_at_gmail.com>wrote:

> This may help....
>
> Authentication
>
> The HSRP authentication feature consists of a shared clear-text key
> contained within the HSRP packets. This feature prevents the lower priority
> router from learning the standby IP address and standby timer values from
> the higher priority router.
>
> To configure the HSRP authentication string, use the standby authentication
> *string* command.
>
>
>
> http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a91.shtml
>
>
> -Kaushal
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 11 2009 - 05:48:09 ART