Hi Martin,
I use additional 10GE modules when the client traffic requires it. For
example, 40GE (4 x 10GE ports) between the chassis (using MEC) when each
chassis is connected to blade servers running VMware seems to be
becoming the norm for server farm VSS 6500's.
regards Andy
Martin Kiefer wrote:
> SXH does not support any service modules in a VSS setup, there you will need
> SXI and if you will be using the new 10G sfp modules you will need to run at
> least SXI2 software.
>
> Btw I have seen some using the 6708 and 6716 10G modules for the VSS link.
> Can anyone explain why you would do that?
>
> I always just use both of the 10G links in the supervisor, some would say
> that this is for redundancy, but where is the redundancy in this?
>
> Best regards
> Martin Kiefer
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Reza
> Toghraee
> Sent: 4. august 2009 19:12
> To: 'KRATTIGER Lukas'; 'Andy Reid'; 'Ram Shummoogum'
> Cc: ccielab_at_groupstudy.com
> Subject: RE: VSS and PFC3A
>
> Correct,
>
> I have a VSS pair, with WS-X6748 with CFC.
> The only problem which I faced was the IOS, which must be SXI, not SXH. SXH
> does not support FWSM modules in VSS.
>
> Regards
> Reza
> CCIE R&S
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> KRATTIGER Lukas
> Sent: Tuesday, August 04, 2009 7:56 PM
> To: Andy Reid; Ram Shummoogum
> Cc: ccielab_at_groupstudy.com
> Subject: AW: VSS and PFC3A
>
> Hi Andy
> This is not correct.
> Only the cards with VSL on it need to have DFC3C and the Sup has to be
> PFC3c.
> All the rest has to be a 67xx-Linecard but no matter if CFC or DFC3c.
> Important is, if DFC, it has to be 3c.
> Cheers
> -Lukas
>
> ________________________________
>
> Von: nobody_at_groupstudy.com im Auftrag von Andy Reid
> Gesendet: Di 04.08.2009 16:47
> An: Ram Shummoogum
> Cc: ccielab_at_groupstudy.com
> Betreff: Re: VSS and PFC3A
>
>
>
> Hi Ram,
>
> Yes, you have to have PFC3C to run in VSS mode. In addition, all modules
> equipped with DFC's must also be DFC3C.
>
> http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps9336/pr
> od_qas0900aecd806ed74b.html
>
> regards Andy
>
> Ram Shummoogum wrote:
>
>> Hi:
>>
>> Do you think I can convert my 6500 series to VSS with a PFC3A on my sup.
>> Or do I absolutely need the PFC3C or PFC3CXL.
>>
>>
>> Thanks
>> Ram
>>
>>
>> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 4305 (20090804) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
>
> __________ Information from ESET NOD32 Antivirus, version of virus signature
> database 4305 (20090804) __________
>
> The message was checked by ESET NOD32 Antivirus.
>
> http://www.eset.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 05 2009 - 23:32:29 ART
This archive was generated by hypermail 2.2.0 : Tue Sep 01 2009 - 05:43:56 ART