Re: AW: VSS and PFC3A

Hi Lukas,

Perhaps you misunderstood me - if the chassis has modules equipped with
DFC's they must by DFC3C/3C-XL. However, this does not preclude you from
removing any DFC's on modules that do not conform and run those modules
in central forwarding mode.

regards Andy

KRATTIGER Lukas wrote:
> Hi Andy
> This is not correct.
> Only the cards with VSL on it need to have DFC3C and the Sup has to be PFC3c.
> All the rest has to be a 67xx-Linecard but no matter if CFC or DFC3c. Important is, if DFC, it has to be 3c.
> Cheers
> -Lukas
>
> ________________________________
>
> Von: nobody_at_groupstudy.com im Auftrag von Andy Reid
> Gesendet: Di 04.08.2009 16:47
> An: Ram Shummoogum
> Cc: ccielab_at_groupstudy.com
> Betreff: Re: VSS and PFC3A
>
>
>
> Hi Ram,
>
> Yes, you have to have PFC3C to run in VSS mode. In addition, all modules
> equipped with DFC's must also be DFC3C.
>
> http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps9336/prod_qas0900aecd806ed74b.html
>
> regards Andy
>
> Ram Shummoogum wrote:
>
>> Hi:
>>
>> Do you think I can convert my 6500 series to VSS with a PFC3A on my sup.
>> Or do I absolutely need the PFC3C or PFC3CXL.
>>
>>
>> Thanks
>> Ram
>>
>>
>> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 05 2009 - 00:04:44 ART