Re: AT over MPLS

What IOS are you running ? works fine with 12.2S

On Thu, Jul 30, 2009 at 12:35 AM, Jerry Chan <temjin1997_at_gmail.com> wrote:

> Hi Mate,
>
> i've got some problem that when i built a AToM on my Dynamips Lab,
>
> SW2 (vlan 123) --- R7 ---- R8 -----(ppp) R3
> (MPLS core)
>
> it cannot let me paste the following command in R8
>
> pseudowire-class R7-R8
> encapsulation mpls
> interworking ip
> ! interface Serial1/2
> no ip address
> encapsulation ppp
> serial restart-delay 0
> xconnect 10.10.0.7 7788 pw-class R7-R8
> ! Incomplete or Invalid Xconnect config
> !
>
> or it show me
>
> R8(config)#int s1/2
> R8(config-if)#xconnect 10.10.0.7 7788 pw-class R7-R8
> Interworking specified in pw-class is not supported on this interface
>
> is it Router cannot be support the interworking ip inside the PPP
> connection
> ?
> if so, how can i make the Ethernet to PPP AToM ?
>
> Thanks,
> Jerry
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards
Deepak Ahuja
CCIE#19545(R&S/SP)
Blogs and organic groups at http://www.ccie.net