Re: OT: GSR SFC DOWN

I am far from being an expert w/ GSR, but it looks like the port has been
powered off by config. This is different than simply shutdown ... , this is
powered off.

Do you all run some power management or have some automated monitoring?
Anything related to power management? The power supplies are good? One
thought might be:

show *gsr power*-mgr

I am sure you have already considered this, ... but if this was for some
reason powered down on purpose, would you want to bring it up and what will
this do to your traffic flow? I am just thinking out loud here about
temporary black holes ...

If you have a support contract, it might be good to have another eyes on
this ... just a thought.

HTH and good luck JD,

Andrew Lee Lissitz

On Fri, Jul 31, 2009 at 12:14 AM, jack daniels <jckdaniels12_at_gmail.com>wrote:

> Hi All,
>
> I'm facing a issue in Cisco 12416 request your help -
>
> show GSR -
> "Slot 19 type = Switch Fabric Card 16XOC192
> state = Administratively Down, Powered" <<<<<<<<<<<<<<<<<<<<<<
>
> how to take it out of this Administratively down state to powered state.
>
> My IOS version is 12.0(32)SY6
>
>
> Regards
> Jack
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net