Hi Andy,
I did this but had a surprising result -
I took out cable from working console  from lets say location 1 and put it
in port not working  location 2, I Got the console. Then I removed the
working cable from location 2 to new location , again it did not work. It
got hung.
Regards
On 7/25/09, Andy Reid <ccie_at_reid.it> wrote:
>
> What happens when you physically move the console cable from a console
> connection that works to one that doesn't? This will isolate the fault to
> the console cable(s) or the device(s). Is the configuration on the console
> port of all the devices you are trying to connect to the same and not
> blocking incoming connections?
>
> regards Andy
>
> jack daniels wrote:
>
> Hi Andy,
>
> In my case 1 or 2 console login I'm getting but not the rest. They hangup as
> shown in my mail
>
> Regards
> J.Daniels
>
>
> On 7/25/09, Andy Reid <ccie_at_reid.it> <ccie_at_reid.it> wrote:
>
>
> I have compared your configuration to mine and I cannot see anything out of
> the ordinary with it.
>
> Have you tried the clear line command? It appears you are getting to the
> terminal server but not out of the line (though usually if it were busy, it
> would have an asterisk next to the line number).
>
> Note that with my setup I had to add "stopbits 1" to the line 0/0/1 0/0/15
> section before it would work.
>
> regards Andy
>
> jack daniels wrote:
>
>
>
> Dear Group,
>
> I'm facing a issue -
>
> My connectivity -
>
>
> 2811 ROUTER -CAB-HD8-KIT ( ASYNC port 8-15) --- ROUTERS CONSOLE PORT
>
>
> PROBLEM - when I do telnet to TEST1 , it opens but when I try to some
> other
> it hangs on below mentioned screen - nothing comes after this.
> Please advise why so . Below is the configuration of my terminal server.
>
>
>
>
>
> ROUTER#telnet TEST4
> Trying TEST4 (1.1.1.1, 2011)... Open
> CCCCCC
>
> *************************************************************************
> *       L E G A L   N O T I C E  --  Y O U    M U S T    R E A D        *
> *************************************************************************
> *                                                                       *
> *      You must have explicit permission to access this device.         *
> *      All activities performed on this device are logged and           *
> *  violations of this policy may result in disciplinary/legal action.   *
> *                                                                       *
> *************************************************************************
>
>
>
>
>
> CONFIGURATION--------
>
> no ip domain lookup
> ip host TEST1 2014 1.1.1.1
> ip host TEST2 2016 1.1.1.1
> ip host TEST3 2015 1.1.1.1
> ip host TEST4 2011 1.1.1.1
> ip host TEST5 2012 1.1.1.1
> !
> !
> !
> interface Loopback0
>  description ***LOOPBACK FOR TERMINAL CONSOLE CONNECTIVITY***
>  ip address 1.1.1.1 255.255.255.255
> !
> interface FastEthernet0/1
>  description ***CONNECTED TO Switch***
>  ip address 2.2.2.2 255.255.255.240
>  duplex full
>  speed auto
> !
> interface Async0/0/0
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/1
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/2
>  encapsulation slip
> !
> interface Async0/0/3
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/4
>  no ip address
>  encapsulationslip
> !
> interface Async0/0/5
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/6
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/7
>  no ip address
>  encapsulation slip
> !
>  interface Async0/0/8
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/9
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/10
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/11
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/12
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/13
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/14
>  no ip address
>  encapsulation slip
> !
> interface Async0/0/15
>  no ip address
>  encapsulation slip
> !
> !
> no ip http server
> !
> !
> control-plane
> !
>
> *************************************************************************
> *       L E G A L   N O T I C E  --  Y O U    M U S T    R E A D        *
> *************************************************************************
> *                                                                       *
> *      You must have explicit permission to access this device.         *
> *      All activities performed on this device are logged and           *
> *  violations of this policy may result in disciplinary/legal action.   *
> *                                                                       *
> ^C
> !
> line con 0
>  password XXXX
>  login
> line aux 0
> line 0/0/0
>  session-timeout 20
>  exec-timeout 0 0
>  no exec
>  transport preferred telnet
>  transport input all
>  transport output telnet
> line 0/0/1 0/0/15
>  session-timeout 200
>  exec-timeout 0 0
>  no exec
>  transport input all
>  transport output all
>
> ROUTER#sh users
>    Line       User       Host(s)              Idle       Location
> *  0 con 0                idle                 00:00:00
>  vty 322                 idle                 00:00:45 61.95.250.177
>
>  Interface    User               Mode         Idle     Peer Address
>
> ROUTER#sh line
>   Tty Line Typ     Tx/Rx    A Modem  Roty AccO AccI  Uses  Noise Overruns
> Int
> *    0    0 CTY              -    -      -    -    -     0      0
> 0/0      -
>     1    1 AUX   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/0    2 TTY   9600/9600  -    -      -    -    -     8      8
> 56245/0      -
>  0/0/1    3 TTY   9600/9600  -    -      -    -    -     2    134
> 0/0      -
>  0/0/2    4 TTY   9600/9600  -    -      -    -    -     1      0
> 0/0      -
>  0/0/3    5 TTY   9600/9600  -    -      -    -    -     0    130
> 0/0      -
>  0/0/4    6 TTY   9600/9600  -    -      -    -    -     0     49
> 0/0      -
>  0/0/5    7 TTY   9600/9600  -    -      -    -    -     3     50
> 0/0      -
>  0/0/6    8 TTY   9600/9600  -    -      -    -    -     1     33
> 0/0      -
>  0/0/7    9 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/8   10 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/9   11 TTY   9600/9600  -    -      -    -    -     0     79
> 0/0      -
>  0/0/1   12 TTY   9600/9600  -    -      -    -    -     0     17
> 0/0      -
>  0/0/1   13 TTY   9600/9600  -    -      -    -    -     1     22
> 0/0      -
>  0/0/1   14 TTY   9600/9600  -    -      -    -    -     1      0
> 0/0      -
>  0/0/1   15 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/1   16 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/1   17 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
> *  322  322 VTY              -    -      -    -    -   291      0
> 0/0      -
>   323  323 VTY              -    -      -    -    -    13      0
> 0/0      -
>   324  324 VTY              -    -      -    -    -     1      0
> 0/0      -
>   325  325 VTY              -    -      -    -    -     0      0
> 0/0      -
>  --More--                              Tty Line Typ     Tx/Rx    A Modem
> Roty AccO AccI  Uses  Noise Overruns  Int
>
>   326  326 VTY              -    -      -    -    -     0      0
> 0/0      -
>   327  327 VTY              -    -      -    -    -     0      0
> 0/0      -
>   328  328 VTY              -    -      -    -    -     0      0
> 0/0      -
>   329  329 VTY              -    -      -    -    -     0      0
> 0/0      -
>   330  330 VTY              -    -      -    -    -     0      0
> 0/0      -
>   331  331 VTY              -    -      -    -    -     0      0
> 0/0      -
>   332  332 VTY              -    -      -    -    -     0      0
> 0/0      -
>   333  333 VTY              -    -      -    -    -     0      0
> 0/0      -
>   334  334 VTY              -    -      -    -    -     0      0
> 0/0      -
>   335  335 VTY              -    -      -    -    -     0      0
> 0/0      -
>   336  336 VTY              -    -      -    -    -     0      0
> 0/0      -
>   337  337 VTY              -    -      -    -    -     0      0
> 0/0      -
>
> Line(s) not in async mode -or- with no hardware support:
> 18-321
>
> ROUTER#sh line
>   Tty Line Typ     Tx/Rx    A Modem  Roty AccO AccI  Uses  Noise Overruns
> Int
> *    0    0 CTY              -    -      -    -    -     0      0
> 0/0      -
>     1    1 AUX   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/0    2 TTY   9600/9600  -    -      -    -    -     8      8
> 56245/0      -
>  0/0/1    3 TTY   9600/9600  -    -      -    -    -     2    134
> 0/0      -
>  0/0/2    4 TTY   9600/9600  -    -      -    -    -     1      0
> 0/0      -
>  0/0/3    5 TTY   9600/9600  -    -      -    -    -     0    130
> 0/0      -
>  0/0/4    6 TTY   9600/9600  -    -      -    -    -     0     49
> 0/0      -
>  0/0/5    7 TTY   9600/9600  -    -      -    -    -     3     50
> 0/0      -
>  0/0/6    8 TTY   9600/9600  -    -      -    -    -     1     33
> 0/0      -
>  0/0/7    9 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/8   10 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/9   11 TTY   9600/9600  -    -      -    -    -     0     79
> 0/0      -
>  0/0/1   12 TTY   9600/9600  -    -      -    -    -     0     17
> 0/0      -
>  0/0/1   13 TTY   9600/9600  -    -      -    -    -     1     22
> 0/0      -
>  0/0/1   14 TTY   9600/9600  -    -      -    -    -     1      0
> 0/0      -
>  0/0/1   15 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/1   16 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
>  0/0/1   17 TTY   9600/9600  -    -      -    -    -     0      0
> 0/0      -
> *  322  322 VTY              -    -      -    -    -   291      0
> 0/0      -
>   323  323 VTY              -    -      -    -    -    13      0
> 0/0      -
>   324  324 VTY              -    -      -    -    -     1      0
> 0/0      -
>   325  325 VTY              -    -      -    -    -     0      0
> 0/0      -
>  --More--                              Tty Line Typ     Tx/Rx    A Modem
> Roty AccO AccI  Uses  Noise Overruns  Int
>
>   326  326 VTY              -    -      -    -    -     0      0
> 0/0      -
>   327  327 VTY              -    -      -    -    -     0      0
> 0/0      -
>   328  328 VTY              -    -      -    -    -     0      0
> 0/0      -
>   329  329 VTY              -    -      -    -    -     0      0
> 0/0      -
>   330  330 VTY              -    -      -    -    -     0      0
> 0/0      -
>   331  331 VTY              -    -      -    -    -     0      0
> 0/0      -
>   332  332 VTY              -    -      -    -    -     0      0
> 0/0      -
>   333  333 VTY              -    -      -    -    -     0      0
> 0/0      -
>   334  334 VTY              -    -      -    -    -     0      0
> 0/0      -
>   335  335 VTY              -    -      -    -    -     0      0
> 0/0      -
>   336  336 VTY              -    -      -    -    -     0      0
> 0/0      -
>   337  337 VTY              -    -      -    -    -     0      0
> 0/0      -
> Line(s) not in async mode -or-
> with no hardware support:
> 18-321
>
> Regards
> J.Daniels
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:http://www.groupstudy.com/list/CCIELab.html
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 25 2009 - 22:55:37 ART
This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:23 ART