Re: ASYNC line connectivity issue to console

I have compared your configuration to mine and I cannot see anything out
of the ordinary with it.

Have you tried the clear line command? It appears you are getting to the
terminal server but not out of the line (though usually if it were busy,
it would have an asterisk next to the line number).

Note that with my setup I had to add "stopbits 1" to the line 0/0/1
0/0/15 section before it would work.

regards Andy

jack daniels wrote:
> Dear Group,
>
> I'm facing a issue -
>
> My connectivity -
>
>
> 2811 ROUTER -CAB-HD8-KIT ( ASYNC port 8-15) --- ROUTERS CONSOLE PORT
>
>
> PROBLEM - when I do telnet to TEST1 , it opens but when I try to some other
> it hangs on below mentioned screen - nothing comes after this.
> Please advise why so . Below is the configuration of my terminal server.
>
>
>
>
>
> ROUTER#telnet TEST4
> Trying TEST4 (1.1.1.1, 2011)... Open
> CCCCCC
>
> *************************************************************************
> * L E G A L N O T I C E -- Y O U M U S T R E A D *
> *************************************************************************
> * *
> * You must have explicit permission to access this device. *
> * All activities performed on this device are logged and *
> * violations of this policy may result in disciplinary/legal action. *
> * *
> *************************************************************************
>
>
>
>
>
> CONFIGURATION--------
>
> no ip domain lookup
> ip host TEST1 2014 1.1.1.1
> ip host TEST2 2016 1.1.1.1
> ip host TEST3 2015 1.1.1.1
> ip host TEST4 2011 1.1.1.1
> ip host TEST5 2012 1.1.1.1
> !
> !
> !
> interface Loopback0
> description ***LOOPBACK FOR TERMINAL CONSOLE CONNECTIVITY***
> ip address 1.1.1.1 255.255.255.255
> !
> interface FastEthernet0/1
> description ***CONNECTED TO Switch***
> ip address 2.2.2.2 255.255.255.240
> duplex full
> speed auto
> !
> interface Async0/0/0
> no ip address
> encapsulation slip
> !
> interface Async0/0/1
> no ip address
> encapsulation slip
> !
> interface Async0/0/2
> encapsulation slip
> !
> interface Async0/0/3
> no ip address
> encapsulation slip
> !
> interface Async0/0/4
> no ip address
> encapsulationslip
> !
> interface Async0/0/5
> no ip address
> encapsulation slip
> !
> interface Async0/0/6
> no ip address
> encapsulation slip
> !
> interface Async0/0/7
> no ip address
> encapsulation slip
> !
> interface Async0/0/8
> no ip address
> encapsulation slip
> !
> interface Async0/0/9
> no ip address
> encapsulation slip
> !
> interface Async0/0/10
> no ip address
> encapsulation slip
> !
> interface Async0/0/11
> no ip address
> encapsulation slip
> !
> interface Async0/0/12
> no ip address
> encapsulation slip
> !
> interface Async0/0/13
> no ip address
> encapsulation slip
> !
> interface Async0/0/14
> no ip address
> encapsulation slip
> !
> interface Async0/0/15
> no ip address
> encapsulation slip
> !
> !
> no ip http server
> !
> !
> control-plane
> !
>
> *************************************************************************
> * L E G A L N O T I C E -- Y O U M U S T R E A D *
> *************************************************************************
> * *
> * You must have explicit permission to access this device. *
> * All activities performed on this device are logged and *
> * violations of this policy may result in disciplinary/legal action. *
> * *
> ^C
> !
> line con 0
> password XXXX
> login
> line aux 0
> line 0/0/0
> session-timeout 20
> exec-timeout 0 0
> no exec
> transport preferred telnet
> transport input all
> transport output telnet
> line 0/0/1 0/0/15
> session-timeout 200
> exec-timeout 0 0
> no exec
> transport input all
> transport output all
>
> ROUTER#sh users
> Line User Host(s) Idle Location
> * 0 con 0 idle 00:00:00
> vty 322 idle 00:00:45 61.95.250.177
>
> Interface User Mode Idle Peer Address
>
> ROUTER#sh line
> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 0 CTY - - - - - 0 0
> 0/0 -
> 1 1 AUX 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/0 2 TTY 9600/9600 - - - - - 8 8
> 56245/0 -
> 0/0/1 3 TTY 9600/9600 - - - - - 2 134
> 0/0 -
> 0/0/2 4 TTY 9600/9600 - - - - - 1 0
> 0/0 -
> 0/0/3 5 TTY 9600/9600 - - - - - 0 130
> 0/0 -
> 0/0/4 6 TTY 9600/9600 - - - - - 0 49
> 0/0 -
> 0/0/5 7 TTY 9600/9600 - - - - - 3 50
> 0/0 -
> 0/0/6 8 TTY 9600/9600 - - - - - 1 33
> 0/0 -
> 0/0/7 9 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/8 10 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/9 11 TTY 9600/9600 - - - - - 0 79
> 0/0 -
> 0/0/1 12 TTY 9600/9600 - - - - - 0 17
> 0/0 -
> 0/0/1 13 TTY 9600/9600 - - - - - 1 22
> 0/0 -
> 0/0/1 14 TTY 9600/9600 - - - - - 1 0
> 0/0 -
> 0/0/1 15 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/1 16 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/1 17 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> * 322 322 VTY - - - - - 291 0
> 0/0 -
> 323 323 VTY - - - - - 13 0
> 0/0 -
> 324 324 VTY - - - - - 1 0
> 0/0 -
> 325 325 VTY - - - - - 0 0
> 0/0 -
> --More--   Tty Line Typ Tx/Rx A Modem
> Roty AccO AccI Uses Noise Overruns Int
>
> 326 326 VTY - - - - - 0 0
> 0/0 -
> 327 327 VTY - - - - - 0 0
> 0/0 -
> 328 328 VTY - - - - - 0 0
> 0/0 -
> 329 329 VTY - - - - - 0 0
> 0/0 -
> 330 330 VTY - - - - - 0 0
> 0/0 -
> 331 331 VTY - - - - - 0 0
> 0/0 -
> 332 332 VTY - - - - - 0 0
> 0/0 -
> 333 333 VTY - - - - - 0 0
> 0/0 -
> 334 334 VTY - - - - - 0 0
> 0/0 -
> 335 335 VTY - - - - - 0 0
> 0/0 -
> 336 336 VTY - - - - - 0 0
> 0/0 -
> 337 337 VTY - - - - - 0 0
> 0/0 -
>
> Line(s) not in async mode -or- with no hardware support:
> 18-321
>
> ROUTER#sh line
> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
> Int
> * 0 0 CTY - - - - - 0 0
> 0/0 -
> 1 1 AUX 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/0 2 TTY 9600/9600 - - - - - 8 8
> 56245/0 -
> 0/0/1 3 TTY 9600/9600 - - - - - 2 134
> 0/0 -
> 0/0/2 4 TTY 9600/9600 - - - - - 1 0
> 0/0 -
> 0/0/3 5 TTY 9600/9600 - - - - - 0 130
> 0/0 -
> 0/0/4 6 TTY 9600/9600 - - - - - 0 49
> 0/0 -
> 0/0/5 7 TTY 9600/9600 - - - - - 3 50
> 0/0 -
> 0/0/6 8 TTY 9600/9600 - - - - - 1 33
> 0/0 -
> 0/0/7 9 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/8 10 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/9 11 TTY 9600/9600 - - - - - 0 79
> 0/0 -
> 0/0/1 12 TTY 9600/9600 - - - - - 0 17
> 0/0 -
> 0/0/1 13 TTY 9600/9600 - - - - - 1 22
> 0/0 -
> 0/0/1 14 TTY 9600/9600 - - - - - 1 0
> 0/0 -
> 0/0/1 15 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/1 16 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> 0/0/1 17 TTY 9600/9600 - - - - - 0 0
> 0/0 -
> * 322 322 VTY - - - - - 291 0
> 0/0 -
> 323 323 VTY - - - - - 13 0
> 0/0 -
> 324 324 VTY - - - - - 1 0
> 0/0 -
> 325 325 VTY - - - - - 0 0
> 0/0 -
> --More--   Tty Line Typ Tx/Rx A Modem
> Roty AccO AccI Uses Noise Overruns Int
>
> 326 326 VTY - - - - - 0 0
> 0/0 -
> 327 327 VTY - - - - - 0 0
> 0/0 -
> 328 328 VTY - - - - - 0 0
> 0/0 -
> 329 329 VTY - - - - - 0 0
> 0/0 -
> 330 330 VTY - - - - - 0 0
> 0/0 -
> 331 331 VTY - - - - - 0 0
> 0/0 -
> 332 332 VTY - - - - - 0 0
> 0/0 -
> 333 333 VTY - - - - - 0 0
> 0/0 -
> 334 334 VTY - - - - - 0 0
> 0/0 -
> 335 335 VTY - - - - - 0 0
> 0/0 -
> 336 336 VTY - - - - - 0 0
> 0/0 -
> 337 337 VTY - - - - - 0 0
> 0/0 -
> Line(s) not in async mode -or-
> with no hardware support:
> 18-321
>
> Regards
> J.Daniels
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 25 2009 - 23:40:59 ART