Re: IE Workbook Volume I

From: Anthony Faria <tfaria72_at_gmail.com>
Date: Fri, 24 Jul 2009 06:20:50 -0700

It works. I use it as for the layer two stuff the commands are different on
the switch modules in the routers. I found you can do all the igp and bgp
and most of the other stuff. Look at the dynamips vol 2 labs intial configs
for the switch module commands. Most the time for routing you are just going
to put ports in vlans.

HTH

Tony

On Fri, Jul 24, 2009 at 6:02 AM, Cisco League <ciscoleague_at_googlemail.com>wrote:

> Hi,
>
> To be honest I too ran into all kind of issues while trying to use dynamis
> with V5 Vol 1 workbook and never managed to get the layer 2 working 100%.
> As
> I don't have enough time I went ahead with rack rentals to do the vol 1
> though it can easily be done on dynamips.
> But coming to the original point. Yes I am referring to .net file for 4.1
> and it is good (in theory) for V5. If you are not able to run entire
> topology then you will have to troubleshoot and tweak. But you can still do
> most of the tasks even if the entire topology is not working the way it
> should.You need at least all the routers talking on frame relay (which
> should not be a problem).
>
> Regards,
> CiscoLeague
>
>
> On Fri, Jul 24, 2009 at 1:43 PM, Shane Killian <shane_at_shanekillian.net
> >wrote:
>
> > Hey Cisco League,
> >
> > I just want to verify. The only Dynamips topology that I have is the one
> > for dynamips workbook 4.1.
> > Is this the topology that you are referring to? I've been having trouble
> > with it.
> >
> > Cheers,
> >
> > Shane
> >
> >
> > On Fri, Jul 24, 2009 at 1:41 PM, Cisco League <
> ciscoleague_at_googlemail.com>wrote:
> >
> >> Hi,
> >>
> >> The physical topology for V5 is same as V4. The dyanmips file for V4 is
> >> valid for V5.
> >>
> >> Regards,
> >> CiscoLeague
> >>
> >> On Fri, Jul 24, 2009 at 1:09 PM, Shane Killian <shane_at_shanekillian.net
> >wrote:
> >>
> >>> Hey guys,
> >>>
> >>>
> >>> I was just wondering if any of you are currently using Internetwork
> >>> Expert
> >>> Workbook Volume 1 version 5 with dynamips?
> >>> If anyone has a preconfigured .net file it would be of great help to
> me.
> >>>
> >>>
> >>> Thanks,
> >>>
> >>>
> >>> Shane
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 24 2009 - 06:20:50 ART

This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:23 ART