2960 switchport config and manual qos values

Ive been burned a few times by Port-Security and having ports err-disabled
due to itany thoughts on this template for my 2960 switches. Came from the
WebGUI port-macro thing.unfortunately this is from remote lab and I dont
have anything in front of me to test;

config
!
udld aggressive
!
mls qos srr-queue output cos-map queue 1 threshold 3 5
mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7
mls qos srr-queue output cos-map queue 3 threshold 3 2 4
mls qos srr-queue output cos-map queue 4 threshold 2 1
mls qos srr-queue output cos-map queue 4 threshold 3 0
!
mls qos rewrite ip dscp
!
macro global description cisco-global
!
errdisable recovery cause link-flap
errdisable recovery interval 60
!
spanning-tree mode rapid-pvst
spanning-tree loopguard default
mls qos rewrite ip dscp
!
interface range f0/1  48
description Host/IP Phone
 no shutdown
 switchport access vlan 2
 switchport mode access
 switchport voice vlan 3
 switchport port-security maximum 2
 switchport port-security
 switchport port-security aging time 2
 switchport port-security violation restrict
 switchport port-security aging type inactivity
 mls qos trust cos
 spanning-tree bpduguard enable
 macro description cisco-phone
 spanning-tree portfast
end

We plug in phones, then PC to back of phone. Also Im thinking for 7911/79411
phones I should have just mls qos trust. Also the LAN Lite 2960 doesnt have
auto-qos voip Cisco-phone so I have to manully set qos  You get what you
pay for.

 EMAILING FOR THE GREATER GOOD
Join me

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 18 2009 - 15:24:47 ART