Re: Multicast Control Methods on the Cisco Switches

Hi Andrew,

  Thanks for the response,will check whether the 3550 and 3560 supports the
same.

Regards
Anantha Subramanian Natarajan

On Thu, Jul 16, 2009 at 6:28 PM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> IGMP snooping is fairly common and easy to do. Finding support for the
> other two is less common ...
>
> Look at the feature navigator to find out which products support the other
> two.
>
> www.cisco.com/go/fn
>
> HTH,
>
> Andrew Lee Lissitz
>
>
> On Thu, Jul 16, 2009 at 3:33 PM, Anantha Subramanian Natarajan <
> anantha.natarajan_at_gravitant.com> wrote:
>
>> Hi All,
>>
>> I am understading that other than CGMP,the below methods provide
>> multicast
>> control on switched Networks
>>
>> 1) Manual configuration on the cam table of the switch to map group to
>> the
>> ports
>>
>> 2) GMRP
>>
>> 3) IGM Snooping
>>
>> I am able to find IGMP snooping on the configuration guide of 3550 and
>> 3560
>> ,not the other two.Can you please let me know under what section the same
>> would be presented.
>>
>> Thanks for the assistance
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com

Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 16 2009 - 18:47:23 ART