Re: ISIS LSP

I'd concur with that.

I've seen those settings in the IS-IS Network Design Solutions book by
Martey/Sturges as well as some DocCD doco...
For example: http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/isfscbp_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1055077

On Sun, Jul 12, 2009 at 2:45 AM, Rin<rintrum_at_gmail.com> wrote:
> Hi Splinter,
>
> I would configure as below:
> - specify only L1 or L2 LSP
> - Change LSP Remaining Lifetime to maximum value: max-lsp-lifetime 65535
> - Change LSP Refresh Interval to maximum value: lsp-refresh-interval 65000
>
> Just my thought, any other ideas?
>
> Rin
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Splinter
> Sent: Sunday, July 12, 2009 1:20 AM
> To: Cisco certification
> Subject: ISIS LSP
>
> Hi,
>
> I need to make sure that the least number of lsp packets are sent between
> routers on a point to point ethernet segment.
>
>
> Thank you
>
> Splinter
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Jul 12 2009 - 04:00:26 ART