Re: Dynamips with 3725 NM-16ESW

You can configure the NM-16ESW ports as either routed or switchports.
Bear in mind you won't get all the functionality you expect from a
real Layer-3 capable switch (eg 3550/3560 etc)

You mention you created SVIs - are you adding the VLANs into the vlan
database as well as assigning the switchports to the correct VLAN?

There's lots of helpful information over at http://7200emu.hacki.at

Cheers.

On Thu, Jul 2, 2009 at 6:09 PM, Ed Paszko<ciscojockey22_at_gmail.com> wrote:
> If anyone is familiar with Dynamips on Ubuntu I would appreciate your help
> with the following question.
>
> I am using all 3725s throughout my configuration.For my four switches I have
> added the NM-16ESW module. I would like to know If I can run routing
> protocols on the 4 switches with this module. I also noticed if I make 2
> ports a SVI on this module I can not ping across the directly connected
> interfaces. Is it possible to use these switches in a routing domain? If not
> are there alternatives?
>
> Any suggestions would be helpful.
>
> Thanks,
> Ed Paszko
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Jul 02 2009 - 18:20:05 ART