RE: NETFLOW

That's the one

________________________________
From: Con Spathas [mailto:ccie19226_at_googlemail.com]
Sent: Tuesday, June 30, 2009 12:42 PM
To: Shaughn Smith
Cc: Splinter; Cisco certification
Subject: Re: NETFLOW

I was reading this yesterday....

http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/sx_mnf.html

On Tue, Jun 30, 2009 at 11:22 AM, Shaughn Smith
<Shaughn.Smith_at_mtnbusiness.co.za<mailto:Shaughn.Smith_at_mtnbusiness.co.za>>
wrote:
When you are configuring netflow you specify the destination and port of the
Netflow collector. You also need to enable ip route-cache flow on the specific
interfaces. In regards to MPLS bits and netflow there is a nice write up on
CCO in regards to exactly that. I don't have the link offhand but just do a
search for it

-----Original Message-----
From: nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>
[mailto:nobody_at_groupstudy.com<mailto:nobody_at_groupstudy.com>] On Behalf Of
Splinter
Sent: Monday, June 29, 2009 6:40 PM
To: Cisco certification
Subject: NETFLOW

Hi all,

need to know if one can do accounting for MPLS bits and send to specific
destination using a specific port.

something like flow-export

Regards

Splinter

Blogs and organic groups at http://www.ccie.net<http://www.ccie.net/>
Received on Tue Jun 30 2009 - 12:43:14 ART